How to open ports on pc: How to open ports in Windows? — FAQ Networking

How to Open Ports on Your Windows 10 PC

Partition Wizard
Partition Manager
How to Open Ports on Your Windows 10 PC — Here’s a Full Guide

By Ariel | Follow |
Last Updated February 11, 2020

Sometimes, you may need to open ports in order to deal with some certain apps and processes. How to open a port on Windows Firewall? In today’s article, MiniTool will share you with a full guide for the port open.

In fact, the majority of ports on your Windows Firewall are closed by default so as to prevent the virus or malware intrusion. However, you may encounter some connectivity issues especially when you attempt to set up a VPN on your computer.

If you suspect Windows Firewall is responsible for these connectivity issue, port open might be a good way to resolve the connectivity issue. At this time, a problem comes into being. How to open ports on Windows Firewall? Now, please keep reading the detailed steps below carefully.

Method 1. Open Ports on Windows Firewall

Windows Firewall can be used to analyse the incoming and outgoing connections to check if they are threats. If you want to fix the connectivity issues, you can open ports for the incoming connections. Now, let’s see how to open ports on Windows Firewall.

Step 1. Type Windows Firewall in the search box and select Windows Firewall from the context menu.

Step 2. In the pop-up window, click Advanced settings.

Step 3. Click on Inbound Rules on the left panel , and then click on New Rule on the right panel.

Step 4. Click the Port option and click Next button, which will allow you to manually choose the ports that you want to open.

Step 5. Then you need to select either TCP or UDP and click on Specific local ports to go on.

Step 6. Type the port number and click on Next button to continue.

Step 7. Select the Allow the connection option and click Next to go on.

Step 8. Select any Network types that you want to allow the connection over.

Step 9. Type a name for the rule and click Finish to apply these changes.

Tip: If you want to open a port for outgoing connections in Windows Firewall, you just need to click Outbound rules, instead of clicking Inbound rules, and then the rest steps are the same.

How to open a port on router? In addition, you can try opening router Firewall ports. Let’s go on.

Method 2. Open Router Firewall Ports

To open router Firewall ports, you need to figure out your router’s IP address first. Here are detailed steps for router Firewall port forwarding Windows 10.

Step 1. You need to find your router’s IP address.

1. Click Start button and select Settings option from the context menu.

2. In Settings window, click Network & Internet > View your network properties. Then you can view the IP address next to Default gateway section.

Step 2. Navigate to your router’s settings page, and then open your preferred browser and enter the router’s IP address into the address bar.

Step 3. Enter your username and password in the login page. If you have forgotten this information, you may have to reset the router.

Step 4. Then you will see a list of port forwarding sections, including the following options:

Port Forwarding

Applications

Gaming

Virtual Servers

Firewall

Protected Setup

Step 5. Select your preferred port. Here you need to enter the following information.

Name or Description: Enter the application’s name.

Type or Service: You can select either TCP or UDP. If you aren’t make sure it, you can also select Both or TCP/UDP.

Inbound or Start: Enter the port number into it. If you are opening more than 1 port, please type the lowest number in the range.

Private or End: Type the port number again here. If you are opening more than 1 port, please type the highest number in the range.

Step 6. Enter the private IP address of your computer. Then click Save and Apply button to save the changes.

Step 7. If prompted, you may need to restart your router to take the changes into effect.

How to open ports? I believe that you already have known the above 2 methods. Try them now.

Facebook

Twitter

About The Author

User Comments :

How to Open Ports on Your Windows 10 PC — Here’s a Full Guide | by Ariel Mu

As some router and laptops support 5GHz Wi-Fi, a great many people want to know how to connect to 5GHz Wi-Fi Windows 10. The post can help you do that.

Step 2. In the pop-up window, click Advanced settings.

Step 5. Then you need to select either TCP or UDP and click on Specific local ports to go on.

Step 8. Select any Network types that you want to allow the connection over.

How to open a port on router? In addition, you can try opening router Firewall ports. Let’s go on.

Have you come across the Minecraft connection timed out error? This error often occurs while playing Minecraft. Here you can get the troubleshooting methods.

To open router Firewall ports, you need to figure out your router’s IP address first. Here are detailed steps for router Firewall port forwarding Windows 10.

Step 1. You need to find your router’s IP address.

1. Click Start button and select Settings option from the context menu.

Step 2. Navigate to your router’s settings page, and then open your preferred browser and enter the router’s IP address into the address bar.

Step 4. Then you will see a list of port forwarding sections, including the following options:

Step 5. Select your preferred port. Here you need to enter the following information.

Name or Description: Enter the application’s name.
Type or Service: You can select either TCP or UDP. If you aren’t make sure it, you can also select Both or TCP/UDP.
Inbound or Start: Enter the port number into it. If you are opening more than 1 port, please type the lowest number in the range.
Private or End: Type the port number again here. If you are opening more than 1 port, please type the highest number in the range.

Step 7. If prompted, you may need to restart your router to take the changes into effect.

How to open ports? I believe that you already have known the above 2 methods. Try them now.

Originally published at https://www.partitionwizard.com on February 11, 2020.

4 ways to view and unlock, setting

On computers with Windows 10 on board, there are many settings related to connecting to the Internet. In particular, some PC owners are trying to figure out how to open ports on the Windows 10 operating system. For an ordinary user, such an operation as “port forwarding” does not mean anything. But knowledgeable people understand that it holds the key to solving many problems. Next, we will figure out when you need to open access, and how this can be done. nine0003

CONTENT OF THE ARTICLE:

What is it for

It’s no secret that the vast majority of programs use the Internet connection through special ports. By default, the computer (or anti-virus software) independently determines which protocol to allocate to a particular application. Unfortunately, it is not uncommon for software to make a mistake at this stage, blocking internet access for certain utilities. The problem is solved only by forwarding the port using OS tools or using third-party software. Instructions for each individual method can be found below. nine0003

Important. To perform the operation, you first need to find out the number that is used by a particular program to access the Internet.

Firewall port forwarding

The simplest option that most users choose. For forwarding, we will create rules for incoming and outgoing traffic. Consider the instruction on the example of port 8080. You can use any other number, specifying its purpose in advance:

Open the «Control Panel» using the Windows search bar or any other way.

Set the view to Category and go to System and Security.

Select Windows Defender Firewall.

Go to Advanced Options.
Right-click on the Inbound Rules tab, and then click on the Create Rule button. nine0022

Set the rule type to «For Port», and in the next window check «TCP protocol» and enter 8080. It is possible that your application uses a different number.

Select «Allow connection» as the action, select all profiles and give the rule a name. To avoid confusion, make the name the same as the name of the program.

Similarly, you will need to create a rule for outgoing connection, because 99% of applications use both types. At the end of the operation, restart the computer and check the operation of the program.

In anti-virus software

You can also set up forwarding through anti-virus programs, be it 3389 for remote connections or 25565 for Minecraft. Let’s consider the operation algorithm using the example of Kaspersky Internet Security anti-virus:

Start Kaspersky Anti-Virus.
Open the program settings by clicking LMB on the gear. nine0022

Go to Advanced and then Network.

In the «Controlled ports» tab, check the «Control only selected …» box and click LMB on the «Select» inscription.

Click on the «Add» button and write down the number.

Save changes.

This method appears to be preferable because the user saves time by not having to create separate rules. However, the option is only workable if other software, such as Windows Defender or router software, does not block the connection. nine0003

Through router settings

You can try to enable game port 27015 or TCP port 80 for unencrypted traffic through router settings. Let’s take as a basis the algorithm applicable to ASUS routers:

Open a browser.
In the address bar, enter the equipment’s IP address (192.168.1.1 or 192.168.0.1).

Enter your username and password (usually the «admin» pair is used).
In the router settings, go to the «Port Switch» section. nine0022

Check “Yes” to activate the function and enter the number after selecting the TCP protocol.
Click the Add button.

If for one reason or another you are unable to enter the router settings, then study the details of the contract. As a rule, the IP address of the equipment, login and password are indicated here.

Of course, in the case of routers of other brands, the instructions will be different. Steps 1-3 will remain unchanged, and all further actions depend on what the router settings menu is. nine0003

In uTorrent

Surprisingly, the uTorrent torrent client has a built-in firewall that periodically blocks ports 443 (hypertext transfer) and 7777 (data transfer control). Therefore, it is also recommended to delve into its settings:

Launch uTorrent.

LMB click on the Settings tab and select Program Settings.

In the «Connection» tab, write down the number of the blocked port. nine0022

Click the Apply button to save the new settings.

There is an easier way to remove restrictions — close all processes associated with uTorrent. But this will not solve the problem if the torrent client is running on an ongoing basis.

Checking the result

When you have opened all the necessary ports on your computer, you will need to check them. Perhaps a mistake was made at one of the stages, and the connection is still limited. To perform the operation, you should turn to the help of special services like 2ip.ru, where in the «Check» section you will need to specify the TCP or UDP port number. nine0003

If you do not trust third-party resources, then open the Command Prompt, enter the query «netstat -a» and press the «Enter» key. A list of all open ports will be displayed on the screen, where you can check for your own.

Ports do not open

If opening ports causes you any difficulties, then first of all it is recommended to check the correctness of the actions performed in accordance with the instructions provided. You also need to clarify once again whether the number is used by your application, and also the fact that third-party software is blocking access. nine0001

Not everyone knows how to open ports on Windows 7, 8, 8.1, but probably many PC users have heard about them. However, for some online games or programs that require access to the Internet, opening additional connections becomes necessary. Sometimes you need to open or check ports that are already open.

Opening a port in Windows

What are we opening?

Port is a specific numeric code that allows the system to communicate with hosts from the Internet. This is a kind of path that helps the necessary data to check and get from a remote server exactly to your computer, exactly at the address. nine0003

Some applications do not require opening an additional connection, since it is already open. But for some closed resources, games (for example, Minecraft), you have to do this manually.

Methods of opening

The easiest general method

The most accessible method is quite simple. The algorithm of actions to be performed is outlined below:

In the «Control Panel» we find the item «System and Security», then open the «Windows Firewall». nine0022

Open Windows Firewall

Select «Advanced Options»
In the window that appears, select «Inbound Rules» (left column).

Select «Rules for incoming connections»

Next, you need to create a rule, click on the appropriate icon.
Rule type «For port», click the «Next» button, put a marker on «TCP protocol» and enter the number (you need to check it exactly). Click «Next» again. nine0022

We put a marker on the «TCP protocol»

Leave all the checkboxes — they determine which profiles the rule will apply to.

Leave all the checkboxes

After that, you will need to come up with a name and, if you need it, a description. We click «Finish».

Specifying a name

That’s it — you have a new rule, now the computer will be able to connect to the desired server.

Connection for the program

This method may be required if the previous method could not provide the required network activity for the required application. That is, simply, the desired program still does not connect to the Internet. nine0003

According to the previous algorithm, we reach the place where you need to select the type of rule, select the rule type «For the program»
Put the marker on the «Program path», select using the «Browse» button or manually enter the program address.
Click «Next», set «Allow the connection».
Then we repeat the same thing that we did with the previous method.

As a result, this program will be allowed to connect to the network.

Disable firewall

The Windows Firewall itself can often block many connections, so in some cases you can simply try turning it off. However, if you do not have any antivirus installed on your computer, then using the Internet with a disabled firewall can be dangerous for your computer.

To disable the firewall, you just need to go into it, select the item «Turn Windows Firewall on or off», in the settings, put the markers on «Turn off Windows Firewall» and click «OK». nine0003

Disabling Windows Firewall

Checking

It is not always necessary to enter a new number and select a protocol, sometimes it is enough to know how to check if the port is open. This can be done using a special command. First, we drive in the command line (opened by pressing Win + R) «cmd» (without quotes), then click «OK», and in the window that appears, enter the command «netstat -a». A list of all open protocols will then appear. Thus, it is easy to check their number.