What is ACPI suspend type in BIOS?
ACPI Suspend to RAM : ACPI stands for Advanced Configuration and Power Interface – not to be confused with APIC or IPCA, which some people may find as options in their BIOS setup programs. … If you enable this feature and experience problems with the standby mode, simply go back into the BIOS and disable it.
Índice de contenidos
What is ACPI function in BIOS?
ACPI is an acronym that stands for Advanced Configuration and Power Interface, a power management specification developed by Intel, Microsoft, and Toshiba. … ACPI is designed to allow the operating system to control the amount of power provided to each device or peripheral attached to the computer system.
What is ACPI auto configuration?
ACPI Auto Configuration: Enables or Disables BIOS ACPI (power management policy) auto configuration. Hibernation State: Enables or Disables system ability to Hibernate (S4). … Power Off – system remains off. Last State – based on system state before the failure it will be either On or Off. Disable – the feature is …
How do I enable ACPI in BIOS?
Press the key for entering BIOS that is indicated in the system’s startup messages. On most computers this is one of the “F” keys, but two other common keys are the “Esc” or “Del” keys. Highlight the “Power Management” option and press “Enter.” Highlight the “ACPI” setting, press “Enter,” and select “Enable.”
S3 (Suspend to Ram): The S3 sleeping state is a low wake latency sleeping state. This state is similar to the S1 sleeping state except that the CPU and system cache context is lost (the OS is responsible for maintaining the caches and CPU context). Control starts from the processor’s reset vector after the wake event.
How do I disable ACPI in BIOS?
If you are unable to obtain an updated bios or the latest bios supplied by your vendor is not ACPI compliant, you can turn off ACPI mode during text mode setup.
To do this, simply press the F7 key when you are prompted to install storage drivers.
Can you replace BIOS?
Yes, it is possible to flash a different BIOS image to a motherboard. … Using a BIOS from one motherboard on a different motherboard will almost always result in complete failure of the board (which we call “bricking” it.) Even the smallest of changes in the hardware of the motherboard can lead to catastrophic failure.
How do I know if my ACPI is enabled?
A.
- Right click on ‘My Computer’ and select Properties from the context menu.
- Select the Hardware tab.
- Click the ‘Device Manager’ button.
- Expand the Computer object.
- Its type will be shown, probably ‘Standard PC’ (if it says (Advanced Configuration and Power Interface (ACPI) PC then ACPI is enabled already)
How do I fix ACPI BIOS error?
How can I fix the ACPI_BIOS_ERROR BSOD error?
- Use a third-party BSoD fixer.
… - Remove your SSD and update your BIOS. …
- Enter BIOS and disable AHCI. …
- Update your drivers. …
- Set the ACPI mode to S1 in BIOS. …
- Disable the jumper JPME1 and reflash BIOS. …
- Uninstall the Microsoft ACPI Compliant driver. …
- Install Windows 10 in UEFI mode.
5 . 2021 .
Should I disable ACPI?
ACPI should always be enabled and set to the most recent supported version. Disabling it will not help overclocking in any way.
Does UEFI support ACPI?
Once Windows is booted, it doesn’t use the BIOS. UEFI is the replacement for the old, icky PC BIOS. … So, in very simplistic terms, UEFI provides support to the OS loader and ACPI is used principally by the I/O manager and device drivers to discover and configure devices.
How do I change power settings in BIOS?
When the BIOS menu appears, press the Right arrow key to highlight the Advanced tab. Press the Down arrow key to highlight BIOS Power-On, and then press the Enter key to select.
Press the Up and Down arrow keys to select the day. Then press the Right and Left arrow keys to change the settings.
What is Microsoft ACPI driver?
The Windows ACPI driver, Acpi. sys, is an inbox component of the Windows operating system. The responsibilities of Acpi. sys include support for power management and Plug and Play (PnP) device enumeration. … sys acts as the interface between the operating system and the ACPI BIOS.
What is S3 mode?
S3 – Standby
RAM maintains power, refreshes slowly. Power supply reduces power. This level might be referred to as “Save to RAM.” Windows enters this level when in standby.
What is S3 resume?
S3 resume is a special boot path defined by the ACPI specification.
During normal boot, firmware may save the system configuration and place the system in the S3 “sleep” state. During S3 resume phase, firmware loads the resume state to quickly “wakeup” the system and return to an operational state.
Do I need ACPI?
4 Answers. ACPI is required for power management to reduce electricity usage and wear-and-tear on the system components. … So your options are to have power-management or not, and since you can always simply not use it (turn off the options in the power control panel applet), you may as well enable it in the BIOS.
Shut down, sleep, or hibernate your PC
There are many ways to shut down your PC—you can turn the PC off completely, you can make it sleep, or you can hibernate the PC.
Turn your PC off completely
To shut down, select Start and then select Power > Shut down.
Sleep
Sleep uses very little power, your PC starts up faster, and you’re instantly back to where you left off.
You don’t have to worry that you’ll lose your work because of your battery draining because Windows automatically saves all your work and turns off the PC if the battery is too low. Use Sleep when you’re going to be away from your PC for just a little while—like when you’re taking a coffee break.
For a lot of PCs (especially laptops and tablets), your PC goes to sleep when you close your lid or press the power button.
To set your PC so it goes to sleep when you close the lid or press the power button:
-
Select Search on the taskbar, type control panel, and select it from the results.
-
Select System and Security.
-
In the Power Options section, select Change what the power buttons do.
-
Select Change settings that are currently unavailable.
-
Select options based on how you want Sleep to work:
-
For a laptop, expand the list for When I close the lid in the On battery column and select Sleep. Repeat for the Plugged in column, if desired.
-
For a desktop, tablet, or laptop, expand the list for When I press the power button in the On battery column and select Sleep. Repeat for the Plugged in column, if desired.
-
-
Select Save changes.
When you’re ready to make your PC sleep, just press the power button on your desktop, tablet, or laptop, or close your laptop’s lid.
On most PCs, you can resume working by pressing your PC’s power button. However, not all PCs are the same. You might be able to wake it by pressing any key on the keyboard, clicking a mouse button, or opening the lid on a laptop.
Check the documentation that came with your computer or go to the manufacturer’s website.
Hibernate
This option was designed for laptops and might not be available for all PCs. (For example, PCs with InstantGo don’t have the hibernate option.) Hibernate uses less power than sleep and when you start up the PC again, you’re back to where you left off (though not as fast as sleep).
Use hibernation when you know that you won’t use your laptop or tablet for an extended period and won’t have an opportunity to charge the battery during that time. First check to see if this option is available on your PC and if it is, turn it on.
To set your PC so it hibernates:
-
Select Search on the taskbar, type control panel, and select it from the results.
-
Select System and Security.
-
In the Power Options section, select Change what the power buttons do.
-
Select Change settings that are currently unavailable.
-
In the Shutdown settings section, select Hibernate.
-
Select Start , and then select Power > Hibernate.
-
Press the Windows logo key + X on your keyboard, and then select Shut down or sign out > Hibernate.
-
Open power options—select Start , then select Settings > System > Power & sleep > Additional power settings.
-
Do one of the following:
-
If you’re using a desktop, tablet, or laptop, select Choose what the power buttons does. Next to When I press the power button, select Sleep, and then select Save changes.
-
If you’re using only a laptop, select Choose what closing the lid does. Next to When I close the lid, select Sleep, and then select Save changes.
-
-
Select Choose what the power button does, and then select Change settings that are currently unavailable. Under Shutdown settings, select the Hibernate checkbox (if it’s available), and then select Save changes.
-
Select Start , and then select Power > Hibernate.
-
Open power options—swipe in from the edge of the screen, tap Search (or if you’re using a mouse, point to the upper-right corner of the screen, move the mouse pointer down, and then select Search), type Power options in the search box, and then tap or select Power options.
-
If you’re using a desktop, tablet, or laptop, select Choose what the power buttons do. Next to When I press the power button, select Sleep, and then select Save changes.
-
If you’re using only a laptop, select Choose what closing the lid does. Next to When I close the lid, select Sleep, and then select Save changes.
Note: If devices connected to your PC (like monitors, printers, or scanners) aren’t working properly after waking up from sleep or hibernate, you might need to disconnect and reconnect your device or restart your PC. You should also make sure that you have the most current drivers for all of your devices.
Turn your PC off completely
To shut down, select Start and then select Power > Shut down.
Sleep
Sleep uses very little power, your PC starts up faster, and you’re instantly back to where you left off. You don’t have to worry that you’ll lose your work because of your battery draining because Windows automatically saves all your work and turns off the PC if the battery is too low. Use Sleep when you’re going to be away from your PC for just a little while—like when you’re taking a coffee break.
For a lot of PCs (especially laptops and tablets), your PC goes to sleep when you close your lid or press the power button.
To set your PC so it goes to sleep when you close the lid or press the power button:
When you’re ready to make your PC sleep, just press the power button on your desktop, tablet, or laptop, or close your laptop’s lid.
On most PCs, you can resume working by pressing your PC’s power button. However, not all PCs are the same. You might be able to wake it by pressing any key on the keyboard, clicking a mouse button, or opening the lid on a laptop. Check the documentation that came with your computer or go to the manufacturer’s website.
Hibernate
This option was designed for laptops and might not be available for all PCs. (For example, PCs with InstantGo don’t have the hibernate option.) Hibernate uses less power than sleep and when you start up the PC again, you’re back to where you left off (though not as fast as sleep).
Use hibernation when you know that you won’t use your laptop or tablet for an extended period and won’t have an opportunity to charge the battery during that time. First check to see if this option is available on your PC and if it is, turn it on.
To hibernate your PC:
Now you’ll be able to hibernate your PC in a few different ways:
When you’re ready to make your PC sleep, just press the power button on your desktop, tablet, or laptop, or close your laptop’s lid.
On most PCs, you can resume working by pressing your PC’s power button. However, not all PCs are the same. You might be able to wake it by pressing any key on the keyboard, clicking a mouse button, or opening the lid on a laptop. Check the documentation that came with your computer or go to the manufacturer’s website.
Hibernate
This option was designed for laptops and might not be available for all PCs. (For example, PCs with InstantGo don’t have the hibernate option.) Hibernate uses less power than sleep and when you start up the PC again, you’re back to where you left off (though not as fast as sleep).
Use hibernation when you know that you won’t use your laptop or tablet for an extended period and won’t have an opportunity to charge the battery during that time. First check to see if this option is available on your PC and if it is, turn it on.
To hibernate your PC:
-
Select Choose what the power button does, and then select Change settings that are currently unavailable. Under Shutdown settings, select the Hibernate checkbox (if it’s available), and then select Save changes.
Now you’ll be able to hibernate your PC in a few different ways:
-
Move your mouse to the lower left-hand corner of the screen and right-click Start or press Windows logo key + X on your keyboard.
Tap or select Shut down or sign out and choose Hibernate.
-
Swipe in from the right edge of the screen and then tap Settings. (If you’re using a mouse, point to the lower-right corner of the screen, move the mouse pointer up, and then select Settings.) Tap or select Power > Hibernate.
Note: If devices connected to your PC (like monitors, printers, or scanners) aren’t working properly after waking up from sleep or hibernate, you might need to disconnect and reconnect your device or restart your PC. You should also make sure that you have the most current drivers for all of your devices.
Turn your PC off completely
To shut down, select Start and then select Shut down.
Sleep
Sleep uses very little power, your PC starts up faster, and you’re instantly back to where you left off. You don’t have to worry that you’ll lose your work because of your battery draining because Windows automatically saves all your work and turns off the PC if the battery is too low. Use Sleep when you’re going to be away from your PC for just a little while—like when you’re taking a coffee break.
For a lot of PCs (especially laptops and tablets), your PC goes to sleep when you close your lid or press the power button.
To set your PC so it goes to sleep when you close the lid or press the power button:
-
Open power options—select Start , then select Control Panel > System and Security > Power Options.
-
If you’re using a desktop, tablet, or laptop, select Choose what the power buttons do. Next to When I press the power button, select Sleep, and then select Save changes.
-
If you’re using only a laptop, select Choose what closing the lid does. Next to When I close the lid, select Sleep, and then select Save changes.
-
When you’re ready to make your PC sleep, just press the power button on your desktop, tablet, or laptop, or close your laptop’s lid.
On most PCs, you can resume working by pressing your PC’s power button. However, not all PCs are the same. You might be able to wake it by pressing any key on the keyboard, clicking a mouse button, or opening the lid on a laptop. Check the documentation that came with your computer or go to the manufacturer’s website.
Hibernate
This option was designed for laptops and might not be available for all PCs. (For example, PCs with InstantGo don’t have the hibernate option.) Hibernate uses less power than sleep and when you start up the PC again, you’re back to where you left off (though not as fast as sleep).
Use hibernation when you know that you won’t use your laptop or tablet for an extended period and won’t have an opportunity to charge the battery during that time. First check to see if this option is available on your PC and if it is, turn it on.
To hibernate your PC:
-
Select Choose what the power button does, and then select Change settings that are currently unavailable. Under Shutdown settings, select the Hibernate checkbox (if it’s available), and then select Save changes.
Open power options—select Start , then select Control Panel > System and Security > Power Options.
Now you’ll be able to hibernate your PC—select Start , select the arrow next to Shut down, and then select Hibernate.
Note: If devices connected to your PC (like monitors, printers, or scanners) aren’t working properly after waking up from sleep or hibernate, you might need to disconnect and reconnect your device or restart your PC. You should also make sure that you have the most current drivers for all of your devices.
Code of Administrative Offenses of the Russian Federation Article 3.12. Administrative suspension of activity \ ConsultantPlus
Code of Administrative Offenses of the Russian Federation Article 3.12. Administrative suspension of activities
(introduced by Federal Law No. 45-FZ of May 9, 2005)
, production sites, as well as the operation of units, facilities, buildings or structures, the implementation of certain types of activities (works), the provision of services. Administrative suspension of activities is applied in the event of a threat to human life or health, the occurrence of an epidemic, an epizootic, infection (contamination) of quarantine facilities with quarantine objects, the onset of a radiation accident or a man-made disaster, causing significant damage to the state or quality of the environment, or in the event of an administrative offense in the field of turnover narcotic drugs, psychotropic substances and their precursors, plants containing narcotic drugs or psychotropic substances or their precursors, and their parts containing narcotic drugs or psychotropic substances or their precursors, in the field of combating the legalization (laundering) of proceeds from crime, the financing of terrorism and financing the proliferation of weapons of mass destruction, in the area of restrictions established in accordance with federal law for foreign citizens, stateless persons and foreign organizations on the implementation of certain types of activities, in the field of rules for attracting foreign citizens and stateless persons to labor activities carried out at shopping facilities (including shopping malls), in the field of management procedures, in the field of public order and public security, in the field of production and turnover ethyl alcohol, alcoholic and alcohol-containing products, in the field of urban planning, in the field of transport security, in the field of property protection, in the field of activities for the return of overdue debts, in the field of activities for the provision of consumer loans (loans), including the obligations of the borrower for which are secured mortgage, in the field of cash registers, in the field of sale of tickets for matches of the UEFA European Football Championship 2020 or documents giving the right to receive tickets for the matches of the UEFA European Football Championship 2020, as well as in the event of an administrative an offense that infringes on the health, sanitary and epidemiological well-being of the population and public morality.
-FZ, dated 12/29/2012 N 277-FZ, dated 04/05/2013 N 58-FZ, dated 10/21/2013 N 275-FZ, dated 12/21/2013 N 365-FZ, dated 07/21/2014 N 210-FZ, dated 03.07 .2016 N 231-FZ, dated 07/03/2016 N 290-FZ, dated 02/05/2018 N 13-FZ, dated 05/01/2019 N 95-FZ, dated 07/26/2019 N 218-FZ, dated 06/11/2021 N 203- Federal Law)
(see the text in the previous edition)
Administrative suspension of activity is imposed only in cases provided for by the articles of the Special Part of this Code, if a less severe type of administrative punishment cannot ensure the achievement of the goal of administrative punishment.
(as amended by Federal Law No. 171-FZ of July 23, 2010)
(see the text in the previous edition)
Administrative suspension of activities is appointed by the judge. For an administrative offense provided for by part 3 of article 9.1 of this Code (in terms of gross violation of industrial safety requirements), an administrative suspension of activities is appointed by the officials specified in paragraphs 1 and 4 of part 2 of article 23. 31 of this Code.
(paragraph introduced by Federal Law No. 421-FZ of December 28, 2010)
ConsultantPlus: note.
The term of the administrative suspension of activities includes the period of temporary prohibition of activities (part 5 of article 29.6 of this document).
2. Administrative suspension of activities is established for a period of up to ninety days. The period of administrative suspension of activities is calculated from the moment of actual suspension of activities of persons engaged in entrepreneurial activities without forming a legal entity, legal entities, their branches, representative offices, structural divisions, production sites, as well as the operation of units, facilities, buildings or structures, the implementation of certain types of activities ( works), provision of services.
(as amended by Federal Law No. 225-FZ of July 18, 2011)
(see the text in the previous edition)
a person engaged in entrepreneurial activity without forming a legal entity, or a legal entity, shall prematurely terminate the execution of an administrative penalty in the form of an administrative suspension of activities, if it is established that the circumstances specified in Part 1 of this Article, which served as the basis for imposing this administrative penalty, have been eliminated.
(as amended by Federal Law No. 171-FZ of July 23, 2010)
(see text in previous edition)
USB Type-C UCM Suspend Resume Test
E-mail address
- Article
- Reading takes 2 minutes
This test checks for connector changes while the system is in system suspend state using UCM
Test details
| Features |
|
| Platforms |
|
| Supported releases 9 Waiting time (in minutes) | 20 |
| Reboot required | false |
| Special configuration required | Yes |
| Type | automatic |
Parameters
| Parameter name | Description of parameter |
|---|---|
| SecondsToDisconnect | Seconds before first CMutt shutdown. |