Amd rx 590 overclock: Reddit — Dive into anything

28 марта, 2023

AMD’s RX 590 early overclocking numbers could make it a GTX 1060-killer



Jacob Ridley



Updated:

AMD

Two new AMD RX 590 graphics cards have been spotted lurking within UL’s 3DMark benchmark database. The two AIB cards, one from PowerColor and the other from XFX, are both brandishing hefty overclocks on top of AMD’s 12nm gains. A promising sign of things to come from AMD’s upcoming silicon refresh.

There are four AMD RX 590 entries in total, two for each AIB card, but let’s start with what looks to be the out-of-the-box factory overclocks. The PowerColor RX 590 is running at 1,576MHz and the XFX card at 1,580MHz. These are both marginal improvements on the 1,545MHz RX 590 that reared its head in a Time Spy run back in October, which shows the RX 590 pulling 9% ahead of the RX 580.

But whoever has access to these cards wanted to see just how far they could push AMD’s latest Polaris silicon. The two remaining clock speeds look to be representative of the cards getting overclocked past their intial GPU frequencies, with the PowerColor managing 1,645MHz and the XFX 1,680MHz. One of these GPUs, although we don’t know which one, manages to knock out an impressive Fire Strike Extreme score of 7,350.

That’s roughly 20% faster than what we’ve seen running an XFX RX 580 at 1,366MHz in our equivalent test bench, and 15% faster than a slightly more capable, factory overclocked Asus Strix RX 580 running at 1,411MHz.

The results were posted by Tum_Apisak on Twitter, although the exact links seem to have drifted into the abyss of 3DMark’s search functionality. As such, we don’t have the exact rig specs for the Fire Strike run. Our test bench is roughly analogous to the Time Spy machine from the initial RX 590 sighting: a Ryzen 2700 CPU, Asus X470 motherboard, and 16GB of 3200MHz DDR4 memory.

The Polaris architecture is not known for its overclocking chops, however. With AMD pushing the current 14nm silicon to its limits back at the factory, there’s little headroom left for gamers to push their GPUs any further. At least not without upping the voltage uncomfortably high and straining your cooling solution.

But the 12nm Polaris architecture – or, more specifically, the Polaris 30 GPU – looks a little more amenable to frequency tweaks. The XFX RX 590 was at least stable enough to finish a Fire Strike Extreme run with a 6% clock speed increase. Not bad for a GPU architecture getting close to its third birthday.

The RX 590 is expected to launch on November 15, according to rumours from a couple of Chinese forums, with a specs sheet almost identical to the RX 580. Both will reportedly come packed with 2,304 GCN cores, a 256-bit memory bus, and 8GB of GDDR5 memory. However, the RX 590 will be built upon GlobalFoundries’ 12nm process, the same one team red opted for with its second-generation Ryzen chips.

AMD is timing the release of the RX 590 to capitalise on the mid-range GPU void in the Nvidia Turing lineup right now. There’s been no word of a GTX 1060 replacement from the green camp, and AMD is moving in for the kill with the RX 590. With a competitive price tag, it could be a smart move for team Radeon.

ASRock Phantom Gaming X Radeon RX 590 8G OC Review Benchmark values and test results

1. ASRock Phantom Gaming X Radeon RX 590 8G OC Review2. The technical data3. Layout, design and features4. Benchmark values and test results5. Power consumption6. Result and general impression

Benchmark values and test results …

The ASRock Phantom Gaming X Radeon RX 590 8G OC has been tested on the following system:

ASRock Fatal1ty AB350 Gaming K4
AMD Ryzen 7 1800X
Crucial 4GB DDR4-2400
Cooler Master Testbench v1.0

Software:
Windows 10 Professional 64 Bit
Unigine Heaven Benchmark 1080p Ultra Settings
Unigine Super Position Benchmark – 1080p Extreme Setting
3DMark Firestrike Extreme
3DMark Timespy
GPU-Z

We start directly in the default setting with the Unigine Heaven benchmark and reach 1470 points.

In the more modern Super Position Benchmark we reach 2798 points.

It continues with the 3DMark Firestrike Extreme. Here the default mode gives us 6751 points.

The fourth discipline is the 3DMark Timespy, where we reach 4779 points.

After this first run in the default setting we also look in GPU-Z at the maximum temperature, which was measured during the benchmarks: 70°C are a good value for the fact that in Smart mode the RX 590 is audible but not loud.

Now we have with the values of the default mode reference values, with which we can compare the other modes.

In OC mode we start again with the Unigine Heaven benchmark and reach 1464 points.

In the Super Position Benchmark, the OC mode can increase a bit and reaches 2841 points.

The 3DMark Firestrike Extreme also benefits from OC mode, reaching 6805 points.

Finally, the 3DMark Timespy, where we reach 4953 points.

The temperature was also in the OC mode at a maximum of 70°C.

The OC mode can increase the performance, but the gain is limited in view of only 31 MHz more GPU clock. Let’s see how the silent mode performs …

In Silent mode we start again with the Unigine Heaven benchmark and reach 1467 points.

In the Super Position Benchmark, Silent Mode comes close to the values of the default mode despite a lower clock rate and reaches 2727 points.

The 3DMark Firestrike Extreme is more sensitive and reaches only 6473 points.

More frugal, however, is the 3DMark Timespy, where we reach a whopping 4800 points.

As expected, the temperature was lower in Silent mode at a maximum of 66°C. The cooling worked even a touch quieter.

Overall, the assumption that the 3 modes are pretty close together is confirmed.

AMD RX 590 graphics card overclocking …

OC versions of graphics cards are always operated by the manufacturer with clock rates that are higher than the standard clock rates that AMD or nVidia provide, but often there is still a little more room for improvement so that the ambitious overclockers can still fine tune. In the first step, we only raised the RAM clock and were able to move the controller a maximum of 2250 MHz to the right, without having to increase the voltage. The GPU ran with the ASRock OC clock of 1591 MHz and 20% increased power limit. We are curious how the increase in memory bandwidth will affect performance.

We start again with the Unigine Heaven benchmark and reach 1529 points.

Even in the Super Position Benchmark, the higher RAM clock can grow properly and reaches 2911 points.

The 3DMark Firestrike Extreme also benefits from the higher RAM clock and reaches 7119 points.

Finally, the 3DMark Timespy, where we reach 5096 points.

The temperature was expected to be similar to the default and OC mode and reached a maximum of 69°C.

Where the performance gain through higher GPU clock was previously behaving rather behaved, the increase can be seen absolutely by the increased RAM clock. This seems to be the true bottleneck of the RX 590.

But now it’s time to pull all the controls to the limit and test where the card’s maximum is We finally reach a stable 1650 MHz GPU or 2250 MHz RAM clock and increase the power limit by 50%.

We start directly with the Unigine Heaven Benchmark and achieve a whopping 1567 points.

In the Super Position Benchmark it is enough to crack the 3000 mark, we reach 3001 points.

It continues with the 3DMark Firestrike Extreme. Again, we put up a gear with 7276 points again.

Also the 3DMark Timespy raises the bar once again, we reach 5224 points.

After this last run we look back to GPU-Z, the maximum temperature, which was measured during the benchmark: 73°C the fan mode “Smart” does even at maximum overclocking a really good job.

All in all, we were able to get a bit more performance by further overclocking, but the higher RAM clock made the biggest difference, whereas the approximately 60 MHz more GPU clock compared to the OC clock of 1591 MHz with more voltage and higher power limit were bought at a high price. For the 24/7 OC operation we would therefore tend to 1600/2250 MHz GPU/RAM clock, so that no voltage increase should be necessary.

Here is a summary of all ASRock Phantom Gaming X AMD Radeon RX 590 test scores in tabular form.

ASRock Phantom Gaming X Radeon RX 590 benchmark results
GPU MHz RAM MHz Powerlimit Temperature Unigine Heaven SuperPosition 3DMark Firestrike Extreme 3DMark Timespy
1560 2000 0% 70°C 1470 2798 6751 4779
1591 2008 +20% 70°C 1464 2841 6805 4953
1529 2000 -20% 66°C 1467 2727 6473 4800
1591 2250 +20% 69°C 1529 2911 7119 5096
1650 2250 +50% 73°C 1567 3001 7276 5224

ASRock Phantom Gaming X Radeon RX 590 power consumption …

<< 1 2 3 4 5 6 >>

AMD RX 590 video card in mining

To read 3 min Published by

AMD RX 590 graphics card is great for mining. Next, we will select the optimal overclocking parameters for mining on AMD RX 590. Find out which drivers to use most correctly and efficiently. Let’s look at the main characteristics and measure the hash rate for popular algorithms.

Specifications

The AMD RX 590 was released on November 15, 2018. The average power consumption is 140.0W. The maximum allowable temperature of the graphics chip is 90 °C

AMD RX 590 yield

The current market price and yield of the AMD RX 590 graphics card in mining fluctuates depending on the value of the cryptocurrency. The information in the plate is updated once a day.

View the complete video card profitability table sorted by price, revenue and payback.

Price ETH ETC EXP UBQ RVN BEAM Profit Payback

AMD RX 590 Hashrate

We have compiled the AMD RX 590 hashrate table for popular algorithms. If you are just choosing a video card for mining, and you already know which coin you will be mining, then you can estimate the approximate performance from the table. And we also have an article about what a hashrate is.

Coin Algorithm Hashrate
Ethereum (ETH) DaggerHashimoto ETH

32.2 MH/S

Ethereum Classic (ETC) Etchash 32.2 MH/S
Expanse (EXP) DaggerHashimoto EXP 32.2 MH/S
Ubiq (UBQ) Ubqhash 32.2 MH/S
Monero (XMR) RandomX 470.0 H/S
Ravencoin (RVN) KawPow 14.0 MH/S
Beam (BEAM) BeamHashIII 13.5 H/S

AMD RX 590 Driver

When installing AMD RX 590 drivers, it is always recommended to uninstall the current drivers first. This way you can be sure that DCH drivers will not be installed by Windows 10.

For older AMD graphics cards (such as AMD R9 290 or AMD HD 7870), Catalyst (Crimson) 15.12 driver may show the best performance and compatibility.

For other video cards, the latest driver version from the AMD manufacturer’s official website is best suited.

Overclocking AMD RX 590 for Mining

We will overclock AMD RX 590 for mining with MSI Afterburner. You can find it in Yandex. The program interface is very simple, albeit a little colorful) To overclock the video card, we need two sliders:

  • Core Clock — overclocking the core, increases the frequency of the core;
  • Memory Clock — memory overclocking, increases the frequency of the memory;
  • Power Limit — allows you to increase or decrease the power consumption of the video card.

MSI Afterburner — overclocking video cards

You need to change the frequency values ​​a little. Then test the stability of the work. If everything is fine, then increase the frequency even more. If the video card starts to crash or the driver crashes, then we simply reduce the frequency and that’s it. There will be no harm. Next, we will consider overclocking options for popular algorithms.

Parts Hashrate Program

Core

Memory

Power

GIGABYTE Radeon RX 590 Gaming 8G WINDFORCE • Alec Brandon Moeller •

25.0 MH/s ⚡️ 32.94 MH/s (+7.9)

DaggerHashimoto ETH

AMD Radeon Software

1425

2240

100%

Sapphire Nitro+ Radeon RX 590 8GB • Qwerty •

12.0 MH/s ⚡️ 32.7 MH/s (+20.7)

DaggerHashimoto ETH

AMD Radeon Software

1244

2200

100%

sapphire rx 590 nitro+ 8gb special edition • Alexander •

27. 8 MH/s ⚡️ 30.4 MH/s (+2.6)

DaggerHashimoto ETH

MSI Afterburner

1250

2250

0%

Asus Radeon RX 590 ROG-STRIX-RX590-8G-GAMING • Maksim Shustov •

32.5 MH/s ⚡️ 34.5 MH/s (+2.0)

DaggerHashimoto ETH

MSI Afterburner

1428

2350

-37%

SAPPHIRE NITRO+ RX 590 8G G5 • Stanislav •

26.3 MH/s ⚡️ 30.02 MH/s (+3.7)

DaggerHashimoto ETH

MSI Afterburner

1155

2200

65%

GIGABYTE RX 590 GAMING • Paul •

29.0 MH/s ⚡️ 32.95 MH/s (+4.0)

DaggerHashimoto ETH

AMD Radeon Software

-12

2200

100%

GIGABYTE RX 590 GAMING • Paul •

29. 0 MH/s ⚡️ 32.95 MH/s (+4.0)

DaggerHashimoto ETH

AMD Radeon Software

-12

2200

100%

How to properly overclock, choose timings and set the rx590 to downvolt

woodlouse777
Knowledgeable