Best casing gaming pc: Best PC Cases of 2022 — Gaming and High-Performance

The 7 Best Cheap PC Cases Under $50

If you’re building a budget PC and you need an affordable case to put it inside, in this guide, we’ve rated and reviewed seven of the best cheap PC cases under $50 to help you find the right case for your build.

If you’re looking to build a new gaming PC, but you’re working with a tight budget, the first component that you’ll want to scale back on is your case. While computer cases do play important roles in the cooling process, they won’t have as significant of an impact on your system’s performance as your other components will.

And, for the most part, you can get adequate cooling and airflow out of a cheaper case. So, while certain cases might lure you in with their aesthetics, the reality is that you’re going to be able to build a more powerful system if you minimize the amount you spend on your case and allocate the savings to more important components (like your processor, graphics card, and RAM).

Fortunately, though, spending less on your case doesn’t mean you can’t get a nice-looking chassis that has decent airflow. In fact, there are quite a few different cheap PC cases that will give you enough room to house just about any single GPU setup and there are plenty of nice-looking options as well. And, in this guide, we’re going to take a look at seven of the best budget PC cases under $50.

Also Read: Which PC Case Size is Best for Your Next Build?

Best Cheap PC Cases

1. AeroCool Bolt (Value)

2. Thermaltake Versa h28 (Airflow)

3. FSP CMT260 (Tempered Glass)

4. Thermaltake Core V1 (Mini-ITX)

5. AeroCool Cylon (Honorable Mention)

6. Thermaltake Versa h27 (Honorable Mention)

7. MasterBox Q300L (Honorable Mention

Quick Look at the Best Budget PC Cases

We’ve provided a quick look table below that highlights our top picks for the best budget PC cases across a few different categories. We’ve made our picks for the best value option, the best airflow option, the best budget case with a tempered glass side panel, and the best mini-ITX option.

		NAME	SPECS	RATING
		AeroCool Bolt	355mm GPU 155mm CPU Mid Tower Black Only	8. 6/10	Check Price Read Review »
AIRFLOW		Thermaltake Versa h28	350mm GPU 155mm CPU Micro-ATX Black Only	8.6/10	Check Price Read Review »
		FSP CMT260	325mm GPU 170mm CPU Mid Tower Black Only	8.6/10	Check Price Read Review »
MINI-ITX		Thermaltake Core V1	260mm GPU 140mm CPU Mini-ITX 2 Styles	8.4/10	Check Price Read Review »

*To read our overviews on each of the four cases listed above, simply click on the “Read Review” link to jump to our rundown on that specific case. You can also keep scrolling further down this post to find out three Honorable Mention picks.

Best Cheap PC Case:

AeroCool Bolt

Our Rating: 8.6/10

Check Price on Amazon

While we do like the Thermaltake Versa h28 listed below, the AeroCool Bolt is an option that offers pretty much all the same features, but in a bigger mid tower format and with some RGB lighting thrown in. The Bolt comes with a tempered glass side panel, one preinstalled fan, a grilled front panel (to help with airflow), an RGB strip on the front panel, and a full length PSU shroud.

And, it gives you all that for just slightly over $50.

That’s a steal of a deal. And, if you didn’t think you’d be able to build a budget system that performs well and looks good, this case might just change your mind.

Its only downside is that the front panel is only grilled/meshed on half of the panel. This should still provide adequate airflow, but a fully grilled front panel would have been more ideal.

However, the 355mm GPU clearance that the Bolt offers is enough to house even an RTX 3080 Ti. So, this is a cheap PC case that can house a very powerful system.

The bottom line, though, is that if you’re looking for a nice-looking case that you can build an affordable gaming PC in, the AeroCool Bolt will give you plenty of room, good airflow, and nice aesthetics, all for right at ~$50.

Affordable High Airflow:

Thermaltake Versa h28

Our Rating: 8.6/10

Check Price on Amazon

Thermaltake’s h28 micro-ATX case and the AeroCool Bolt are our picks for the best airflow options among cases under $50. The h28 is an all-black case that will give budget builders a nice-looking chassis that will provide adequate airflow for their components.

The h28 can support graphics cards up to 350mm long and CPU coolers as tall as 155mm. With 350mm of clearance for the graphics card, that means the h28 can house pretty much any graphics card currently available.

It can also support three different radiators at the same time (on the front, top, and back of the case) with the ability to hold a radiator as long as 280mm (on the front of the case). So, if you want to put a 280mm AIO cooler in this case, you definitely won’t be lacking for options that will fit inside of it.

As a micro-ATX case it can hold both micro-ATX and mini-ITX motherboards.

Ultimately, for right about $50, the Thermaltake Versa h28 comes with the room, clearance, and airflow necessary to house a high-end gaming computer. So, if you are looking for a budget-friendly case that you can use to build a solid system with, or a case that you can grow into in the future, the h28 is a solid option that won’t cost you an arm and a leg.

Budget Tempered Glass:

FSP CMT260

Our Rating: 8.6/10

Check Price on Amazon

Most budget PC cases don’t get a lot of love, but FSP’s CMT260 is probably an even lesser known option. However, it is one of the cheapest PC cases out there. Its biggest feature is probably its tempered glass side panel as you typically won’t find tempered glass on a case in this price range.

Unfortunately, though, it doesn’t come with a fully-ventilated front panel—which will restrict airflow. In most cases, this won’t have a drastic impact on system performance, but over the long run, a fully-ventilated front panel will help in ensuring your components stay cool.

Still,though, at just under $50, the FSP CMT260 is one of the cheapest PC mid tower tempered glass PC cases currently on the market. So, if you’re looking to save some money, it wouldn’t be the worst route to go.

Overall, for a little under $50 you get a nice-looking case that has a tempered glass side panel, some RGB-lighting on the front panel, and enough room inside to house a solid system.

Budget Mini-ITX Case:

Thermaltake Core V1

Our Rating: 8.4/10

Check Price on Amazon

Another Thermaltake case that comes in under $50 and is worth mentioning is the Core V1. The Core V1 is a mini-ITX case and it was also one of our choices for the best cube-style cases as well.

Despite its compact size, it can still hold graphics cards that are up to 260mm long and CPU coolers that are up to 140mm tall. So, while you can’t fit a longer graphics card in this case, or a taller heatsink, there are plenty of low-profile graphics cards and low-profile coolers that will work with it. In fact, you can fit a mini RTX 3070 inside of the Core V1, which means you won’t be limited in the kind of gaming-specific system you can build in this case.

Again, the case is a mini-ITX form-factor so you will only be able to fit a mini-ITX motherboard inside of it.

In the end, if you don’t have a huge budget, but you still want to build a small form-factor gaming PC, the Thermaltake Core V1 will allow you to do so without having to spend a ton of money on your case.

Honorable Mention #1:

Aerocool Cylon

Our Rating: 8.5/10

Check Price on Amazon

Much like the AeroCool Bolt and the FSP CMT260, the AeroCool Cylon is a bit of a lesser known option. Aerocool is an established PC hardware brand, but they don’t have quite as much name recognition as the more well-known brands (Cooler Master, Thermaltake, NZXT, Corsair, etc.) However, like the Bolt, the Cylon is another solid option in the under $50 price range. It comes with a full-length PSU shroud, an acrylic side panel, and an RGB strip on the front panel of the case that stretches from the bottom of the panel to the top of the panel.

It can also hold graphics cards up to 371mm in length and CPU coolers up to 155mm in height. And, it can house radiators/AIOs as long as 240mm on the front of the case.

The case has a really nice-looking design, but the one downside is the lack of ventilation on the front panel. It does come with the option to install two 120mm fans on the PSU shroud to help remove heat from your graphics card, though, but the solid front panel won’t allow for as much air intake as you might want.

Still, though, this might be the best looking case under $50 when all things are considered. And, it is the only option on this list to come preinstalled with RGB lighting. So, if you prefer aesthetics over airflow, this wouldn’t be a bad option.

Honorable Mention #2:

Thermaltake Versa h27

Our Rating: 8.4/10

Check Price on Amazon

Thermaltake’s Versa H-Series is a solid lineup of budget-friendly cases. We’ve provided a picture of the Thermaltake Versa h28 above, but the Thermaltake Versa h27 is a good option as well.

The h27 is a micro-ATX case that offers GPU clearance up to 350mm long and CPU cooler clearance up to 155mm tall. Unlike the h28, though, the h27 doesn’t come with a grilled front panel. That’s not ideal as it will not allow for as much airflow as some of the options listed above.

However, the h27 is also one of the cheapest PC cases on this list and so if you’re looking to save a little bit more, it’s worth considering.

But, ultimately, we recommend one of the more ventilated options listed above.

Honorable Mention #3:

MasterBox Q300L

Our Rating: 8.3/10

Check Price on Amazon

The MasterBox Q300L is another impressive budget-friendly PC case. This one comes in at a little over $50 (as do a majority of the cases on this list—thanks inflation), but it is still a solid option for anyone who is looking for an affordable option to house their components.

The case comes with two easy-to-remove dust filters on the top and front panels of the case. The Q300L also offers quite a bit of flexibility in where you can place the I/O panel by giving you the ability to place it in six different locations.

All-in-all, while we like some of the other case options listed above a bit better, the Q300L will be an excellent option for anyone who prefers its aesthetics and unique feature-set.

Will A Budget PC Case Work for Your Build?

While you might be tempted to spend more on your case, if you’re trying to build a budget gaming PC, you might be sacrificing overall system performance for a nicer-looking case. However, any of the budget-friendly PC cases listed above will help you get a solid overall case that will still keep you under budget. So, if you need a cheap PC case for your upcoming build, one of the options above should work for you.

4 Things to Consider Before Buying

While computer cases aren’t components that play a direct role in the kind of performance your PC will be able to achieve, they are still very important to your overall system.

PC cases house and protect all of your components and they also play a big role in influencing airflow in your system to keep it running cool (at least, the good cases do.)

But, there are so many case options out there. And, they all come in different sizes and with different designs and with a huge variety of feature sets. So, despite the fact that a computer case is one of the more exciting components to choose, there is a lot to consider when trying to pick the right one for your needs.

In this post, we’ll go over four different factors (some with a lot of sub-topics) to consider when choosing a case for your PC build. Hopefully, by the end of this post, you’ll have a better idea of what to look for in a case so that you can be better able to find the best PC case for you and your new system.

Table of Contents

1. Compatibility, Clearance, & Form-Factor
2. A Case’s Role in Cooling & Air Flow
3. Importance of Expert PSU Reviews
4. Case Build Quality
5. Case Aesthetics (& Cable Mangement)

MORE FROM THIS SERIES1. What to Look for In A CPU2. How to Choose A CPU Cooler3. How to Choose A Motherboard4. How to Choose A Graphics Card5. How to Choose A Power Supply6. How to Choose A Case for Your PC7. What to Look for In A Gaming Monitor8. What to Look for in A Gaming Chair

Case Compatibility, Clearance, and Form-Factor

Technically, this section could just simply be titled “Case Compatibility,” because, when talking about case compatibility, both clearance issues and form-factor are really just two subsets of case compatibility.

But, for the sake of organizing this post, I’ll break case compatibility down into those two sections:

Form-Factors and Common Case Sizes

There are really four common case sizes:

1. Full Tower (Large)
2. Mid Tower (Medium)
3. Micro-ATX (Small)
4. Mini-ITX (Smaller)

Technically, there are no standards for case size—at least, in terms of the dimensions of a case. All cases, however, support one or more of the various computer motherboard form-factors.

The most common motherboard form-factors are:

1. Extended ATX
2. Standard ATX
3. Micro-ATX
4. Mini-ITX

You can check out our more extensive guide on the differences between micro-ATX, mini-ITX, and standard ATX motherboards here.

The bigger the case is, the more likely it is to be able to hold a variety of motherboard form factors. For instance, some full tower cases out there can hold any of the four common motherboard form-factors.

Of course, putting a mini-ITX motherboard in a full tower case is going to look silly. But, in terms of compatibility, it is possible to do so.

On the other hand, smaller form-factor cases are limited by their size and, therefore, cannot accommodate the larger motherboard form-factors. For instance, you cannot put a standard ATX motherboard inside of a mini-ITX case or a micro-ATX case.

But, again, this is really the only standard that binds the different cases in a common case size together. What I mean by this is that, while all mid towers share the ability to hold standard ATX motherboards, not all mid tower cases have the same dimensions and feature sets. And, the same goes for the rest of the common case sizes.

Also Read: Which PC Case Size is Best for Your Next Build?

So, really, the main thing to consider when it comes to motherboard form-factor when you go to buy your case, is that you ensure that the motherboard you have chosen (or are planning on choosing) will fit inside of the case you are considering purchasing.

Of course, this can easily be accomplished by checking the case’s spec sheet and seeing which motherboard form-factors it can accommodate.

Clearance & Other Compatibility Issues

While the motherboard form-factors that a case supports are one type of compatibility issue that you will need to consider before choosing a case, you will also want to make sure that all of the other components you choose will fit inside of your case.

The most common clearance and compatibility issues to watch for when shopping for a PC case are:

• Graphics card length
• Air CPU cooler height
• Liquid cooling radiator size

Let’s dive into each of these three issues below…

Graphics Card Length

Typically, higher-end video cards are longer than budget-friendly video cards are. The longer graphics cards can cause clearance issues in some smaller cases.

While this is becoming rarer as A) graphics cards, on average, are getting shorter, and B) mid tower and smaller cases are starting to be built to accommodate longer graphics cards.

However, it is still an issue that persists. So, before you finalize your part list, you need to check the spec sheet of both your case and graphics card to check how long your card is and how much clearance for a graphics card your case has. If your case can accommodate graphics card lengths that exceed your graphics card, then you are good to go.

If not, you will want to look for a shorter alternative. And, if you’re looking to get a small form-factor case, you’ll likely want to consider going with a low profile graphics cards that are available (both Zotac and Gigabyte have mini versions available on even their higher-end cards.)

Air CPU Cooler Tower Height

Just like some graphics cards are longer than others, some air CPU coolers have taller heatsinks that other coolers. And, not every case is deep enough to accommodate the tallest air coolers.

Also Read: Do You Need a CPU Cooler for Your PC?

To ensure that the CPU cooler you have chosen will fit inside your case, again, just check the spec sheet of both the case and air CPU cooler you are considering. Your case’s spec sheet should specify how tall of a CPU cooler it can accommodate, and the CPU cooler you are considering will list its height.

If you’re limited on space and you don’t have the budget for a liquid cooler (or you don’t want one), one solution may be to use a low-profile air CPU cooler.

Liquid Cooling Radiator Size

Liquid cooling systems (whether AIOs or custom loops) utilize liquid to transfer heat from your processor to a radiator. The radiator has fans installed on it, which dissipates some of the heat from the radiator.

However, there is no single standard radiator size. In fact, radiators come in a variety of sizes.

And, just like how not every case can accommodate every CPU cooler and graphics card, not every case can accommodate every radiator size.

So, before you choose a liquid cooling setup (AIO or custom loop) to pair with your case, it’s important that you check your case’s spec sheet to ensure that the radiator that comes with your liquid cooler will fit inside of your case.

Another important thing to note is the difference between AIO coolers and custom liquid cooling setups. Custom liquid cooling setups require extra space for reservoirs and therefore, a case that supports larger radiators isn’t necessarily a case that will work for custom loops. Although, the two do typically go hand-in-hand.

AIO Cooler Buyer’s Guides:

• Best 120mm AIO CPU Coolers
• Best 240mm AIO CPU Coolers
• Best 280mm AIO CPU Cooler
• Best 360mm AIO CPU Coolers

A Computer Case’s Role in Cooling and Air Flow

While the biggest draw of PC cases is typically their aesthetics, cases do play a significant role in the cooling process of your computer. Keeping your components cool is obviously an important part of building and maintaining a computer. The cooler your components run, the longer they will typically last, and the fewer problems you will run into.

Computer cases contribute to (or hinder) the cooling process by the air flow they provide (or fail to provide). Your PC case will also determine what kind of CPU cooler you can get. (See the section above on clearance and compatibility.)

If you want to choose a case with high air flow and good cooling capability consider the following:

1. The case should have the ability to accommodate multiple fans at various locations in the case (front, back, top, side, etc.)

This doesn’t necessarily mean that the case you choose has to come with a bunch of fans pre-installed. Most cases only come with a few fans pre-installed (cheaper cases typically come with only one or two pre-installed).

But, budget permitting, you should try and choose a case that has the option to add multiple fans. And, it’s always a good idea to get a case that can accommodate fans on the front and back (or top) of the case so that you can intake air from the front, and then exhaust it out the back (or top).

2. The panels (front, side, and top) on a case also play a large role in air flow.

Cases that have grilled panels or grilled openings on their panels are ideal because the grill-design allows more air to flow into (and out of) the case.

On the flip side, cases that have solid front, top, side, and back panels restrict the air coming in and exiting the case because there is less of an opening for air to get into (or exit) the case.

So, when possible, try and choose a case that has grill panels, as that will increase the air flow in your case, which will, in turn, keep your components cooler.

3. Also, again, as we mentioned above, certain cases will not be able to accommodate certain CPU coolers and liquid cooling radiators.

And, while that doesn’t necessarily mean that those cases aren’t good options in terms of air flow and cooling, it does mean that they will have some limits on the types of coolers you can install in them. So, if you like the idea of getting an AIO cooler with an enormous 360mm radiator on it, but you really like a specific case that can only hold a 240mm radiator in it, you’re going to have to sacrifice one or the other.

3. Case Build Quality

Build quality is another important feature. Cheaper cases are built with lower-quality materials and, as a result, tend to show more dings and scratches, are less sturdy, have thinner panels, and will wear down more quickly.

On the other hand, higher-end cases typically have a much more solid frame and are thus more sturdy.

Of course, for some budget-oriented builders, there is no way around going with a cheaper case option. And, that’s completely fine. But just know that while a cheaper case may look cool and have some nice features, there likely had to have been some corners cut somewhere, and it is probably that they were cut on the materials and build quality of the case.

Check out these budget-friendly PC cases under $50.

4. Case Aesthetics (& Cable Mangement)

This is just my opinion, but I sincerely believe that if there weren’t so many cool computer cases to choose from, a lot fewer people would build their own computers. It might seem like a silly opinion—especially since cases have no direct impact on your system’s performance—but just imagine that the only case you could get was one of those basic-looking cases that cheap pre-built computers come in.

It kind of takes the fun out of building a computer a bit, right?

In any case, case aesthetics are important because most people want their case to look cool.

So, in this section, I’ll go over four different aspects of case aesthetics that you should consider before choosing a case:

Cable Management

In my opinion, there are three different types of people who will build computers.

1. People who are incredibly particular about their cable management.
2. People who do a decent job at cable management, but aren’t going to take it to the extreme.
3. People who just don’t care about cable management.

For the first two types of people, choosing a case that is designed with cable management in mind is the way to go. If building a clean looking system is one of your goals, then doing your due diligence on cable management is a must. You can color coordinate all of your components, get a case with a tempered glass side panel, and fill your system with a bunch of RGB lights… but if you don’t clean up your cabling, your build isn’t going to look good.

While cable management is a bit of an art and people who excel at cable management can probably make the cabling look good in any case, having a case that has plenty of cable management options is going to go a long way towards helping you hide your cables in an efficient manner.

This is even more true for first-time builders who are likely going to be more focused on getting their computer assembled properly than they are on ensuring their cables are clean and hidden. The extra cable management features that some cases come with will make the process easier for first-time builders so they don’t have to worry about it as much.

Also Read: How to Build A Gaming PC (Step-By-Step)

Some cable management features to look for on prospective cases are:

• Plenty of holes and hooks/loops all over the case
• Rubber grommets around the holes to conceal the gaps
• Cases that have some depth behind the motherboard to accommodate large groupings of cables
• PSU shrouds are nice because they make cable managing with non-modular PSUs much easier. (And, they look really clean.)

See-Through Side Panels

If you want to build a nice-looking system, a case with a see-through side panel will help you show off the inside of your PC. And, if you take your time and do a good job managing your cables you can earn some serious credit among your non-techie friends for how cool your computer looks.

It’s important to note that not all side panels are made equal. Tempered glass side panels are your best bet. If you can avoid an acrylic see-through side panel, definitely do so. Acrylic is really easy to scratch. I’ve even left scratches on acrylic side panels just by using a cloth to try and wipe off the dust.

PSU Shrouds

I’m a big fan of the PSU shroud movement. In my opinion, PSU shrouds are a godsend for A) those of us who don’t have elite-level cable management skills, and B) those of us who are working with a tight budget and have to go with a non-modular power supply.

Also Read: Modular vs Non-Modular PSUs

With a case that doesn’t have a PSU shroud, and with a non-modular power supply, you could do every other aspect of cable management perfectly, but if you don’t have anywhere to hide the mess of molex and SATA power cables that are left over, your going to have a huge eyesore to look at inside of your case. With a PSU shroud, that mess is hidden by default.

Even if you do have a semi-modular or modular power supply, though, a PSU shroud helps provide a clean look that keeps the focus on your main components.

RGB Lighting

With RGB lighting being so popular, it’s no wonder that there are an ever-increasing amount of cases that feature RGB lights in some capacity. Of course, RGB fans and RGB led strips can be purchased separately and added to a case that doesn’t come with them. But, if the case already includes them, that’s less RGB lighting you have to pay for after the fact.

Just make sure that if you want a specific color scheme that the case does come with RGB lights and not just a specific color led light.

Which Case is Right for You?

There are literally hundreds of case options to choose between. The right case for your will come down to, first, how much you have to spend, and, second, the other components you have (or have chosen) for your build and whether or not they are compatible with the case you are considering, and, third, your personal preferences on some of the factors discussed above.

Heres is a breakdown of all of the parts you’ll need to build a gaming PC.

Ultimately, though, if you have read through this post, you’ll have a much better idea of what to look for when choosing a PC case that suits your needs.

Rating of cases for PC — TOP 18 models of 2021

Competently choose a case for your computer building to live up the terms of life of all components with a way to meet in the middle of the optimal temperature regime. We have prepared for you a rating of 18 best cases, according to different budget options and recognition: from cases for simple office machines, to wide and well-ventilated solutions that are suitable for gaming or professional work with media content.

If you want to go deeper into the selection criteria, take a look at our article «How to choose a PC case» in your blog. 9

Silver Stone Lucid

3699

Corsair 280X RGB Tempered Glass Black

This category has budget options up to 1500 UAH. The main benefit to them is the ability to expand the motherboard of a variable expansion. Office PCs usually have video integration or discrete cob level. There will be no high temperatures near the building, which means there is no reason to overpay for 4-5 installed fans for cooling, if you want to get a good landing for a few pieces.

Also, there are five models with a complete living unit. Sound so the power supply unit can be at a power of 350-400 W, which is quite practical for a computer of a similar class. Such a purchase can be allowed to be spared — the distribution of goods will become a trifle more expensive.

Rezone Case RCS101

Cheaper than a cardboard box! Ale, it’s hot, the buildings from the upper roztashuvannyam of the living block are to go for the simplest configurations. However, for Word and Excel adepts, there is no need for more. For a small price, we can accept the classic Midi Tower, in which it is easy to fit an ATX form factor board or a smaller one, with a complete 400 W PSU.

Easy to pick up from case. The USB port on the front panel is class 2.0, but in a similar budget it’s easy to fit in.

Vinga CS106B-450W

Importantly Vinga cases are budget solutions for their segments. І CS106B is not a fault. Vіn maє primnny, hocha i not even arguably design. On the walls there is a ventilation crate and landing space for two coolers — for blowing that air. Support for ATX motherboards, the ability to accommodate up to 4 Sata 3.0 storage devices, standard output ports — two USB and two audio input 3.5 mm jack.

Tse, maybe one of the best budget buildings with a complete living unit (450 W, with top placement).

CoolerMaster MasterBox MB600L

A good butt of the budgetary, but, one hour, to finish the universal housing from the lower living quarters. Try the low varity, tse povnotsіnne solution, in which case just choose an office PC or an average equal to a gaming machine. It is worth noting that the cooling system can be cooled up to 400 mm and allows expansion of a cold water cooling radiator, so it is possible to increase the overall cooling system with a turntable up to 120 mm (up to 140 mm in the case of cold winds).

The steel is thin to the body, the aloe is sharpened, it is protected from the saw blade in the middle — filters and large stamped plastic sheets with a large middle.

The strength of the body is its design. Zovnishnya kryshka vykonan s orgskla, it is strongly attached to the walls, and sits on the thin back of the narrower, which dampens the vibrations. Orgsklo tovste, but do not create colors. To that, on the mother’s board, there will be a pіdsvіchuvannya — it will be nice to finish it.

Zalman S4 black

Yak_st vikonanny here is good: rolled metal edges, gummed legs, a decent set of accessories: screws, plugs, ties for cable management. The outer cover is made of translucent acrylic, it is tiled with perforation under the laying of wires — metal.

The case itself is small, it is easy to place a board in it, starting from the ATX form factor, as well as a lower fan for the processor (up to 120 mm in diameter, and up to 160 mm in height). Virobnik declares support for up to 8 Sata 3.0 accumulators in 2.5-inch format. In fact, you can install a maximum of 6, if you want and the quantity of 99% of the core will be sufficient.

ThermalTake Versa h28

Case with a cheaply brutal Hi-Tech design that will organically fit into most modern home environments. The location of the bulletin board is lower here, metal caps and the frame are thin and supple. The kit has one cooler for 120 mm and you can add up to 3-4 pieces (depending on the diameter).

Saw filters installed. The upper magnetic, the same as the BZ, without magnetization ale znimny. Obidva is easy to clean. On the front panel, the filter is daily. Case supports video cards up to 350 mm, processor cooler up to 155 mm in height, and up to 120 mm in diameter. To install a massive radiator for water cooling, the space may not be installed, but compact factory «dropsy» for 2-3 turntables can be placed as a whole.

Scorching high brightness, which is typical for budget Thermaltake cases, on a high level. Here you can pick up an office machine and a mid-range gaming PC.

It is problematic to choose them to create an average productive gaming or designer computer and to go to the same compromises with cooling, but the stink is not recognized for anyone. The main sphere of congestion is office and home solutions, browser, editors and other awkward tasks.

Most of the different cases support both horizontal and vertical installation, which, without a hitch, ensures the same flexibility when arranging the working space.

Vinga CS403B

Super-compact nettop-type case for office or home woven PC based on mini ITX motherboards. The main feature is ultra compactness. Vaga — total 500 grams, dimensions — 65 x 200 x 200 mm.

Special fasteners can be installed either vertically (wycorst support elements) or horizontally. The cooler’s maximum height is 55 mm. Discrete GPU in which case is, unfortunately, not to go into it. Vіdsіkіv for hoarders is less than 2, one for 2.5, the other for 3.5”.

Zamіst BZ here is a live adapter, like on laptops, the intensity is declared — 120 W, but it’s better to spare the components and indications by 30-40% less, so you can’t go wrong with the peak pressures of the wines. 9Compact Variation in installation.

Complete 120 W adapter, which does not see the stated power rating.

External living adapter.

Silver Stone Stone SUGO

Supercompact SUGO G13 In any positional conflict, even the maximum length of the video card is 270 mm, which is not enough for modern cards of average productivity. Do not match the folding of a productive PC and the upper space of the BZ and the exchange for the height of the processor cooler (up to 61mm).

Another way to look at it like a case for an office machine is the same option. The compact body with a slight twist, adopting a modern design — everything will allow you to organically fit yoga into your work space.

Landing places for accumulating a lot, but more than 2-3 of them should not be missed, otherwise you can’t get a place for laying wires.

Aerocool Mini Frost-G-BK-V1

BUTSTIONAL TIPATIONS INSITH INTARIS. From this “little one” it is easy to select a medium-productive gaming PC, the aerodynamics of the internal space are well thought out here. The set is good, there are a few sets of screws, ties and plugs from the reserve.

Support for Micro ATX motherboards (smaller ones). The height of the processor cooler is up to 160 mm, and in this size you can know the productive CPU for gaming. The video card is supported up to 345 mm — it means that there are more relevant solutions on the market.

Still, the small dimensions of the hull impose heavy fencing. So with a competent laying of cables, it will be unhandy to mount an additional accumulator (the main one is installed without problems).

Chieftec Uni (BU-12B-300)

The Uni BU-12B-300 is an insanely wonderful example of how you can create an inexpensive and stylish solution for compact PCs that can easily fit into modern office and coworking environments.

Enclosure equipped with a 300W front-mounted living unit, outdoor type (can be replaced with a low-profile model in the SFX frame). The insurance margins on the motherboard are Micro ATX (lesser), CPU cooler height up to 65 mm and GPU up to 305 mm (less low-profile). In this way, on the basis of Chieftec Uni, we can choose an office or an average game configuration without any external facilities.

The case supports both vertically and horizontally installation, on the front mounting panel there is a new set of basic roses.

Asus ROG Z11

GR101 ROG Z11 having consumed our rating is not vipadkovo — it is, in fact, a single case, in which you can fit a gaming PC based on a mini ITX board, with which you can use a fully sized video card (up to 320 mm) and a living block, as well as accommodate up to 4 x accumulative storage (comfortable access to them will be ensured for practical cable laying schemes). The height of the cooler for the CPU is limited by 130 mm, which is also a good indicator.

Besides, the quality of the selection is on high. Tovst metal, a bіchne vіkno іz zagartovannogo skla, zhorst frame of the base — all doing it looks like superstition and monumentality. Select ROG Z11 manually, PSU will be of ATX form factor (standard size with flexible cables) or SFX, packaged with bagat accessories.

CHILDSHICH ITSHITY PROPECISHIET OF THE FASTRICAL OF FASTRICAL OF FULTICAL TOWER TOWER TOWER TOWER TOTER Whatever is larger in the middle of the free space is more cold. Naturally, all presented in this part of the rating of the model without a complete block of living from the lower accommodation (for ensuring the optimal temperature regime of work). For this category, there is already a need for 3-4 front-mounted fans and landing maidanchiks for additional ones. Also, in a spacious building, it is easy to install refrigerated or water cooling systems.

Deepcool Matrexx 50 Add-RGB 3F

Corps Iz Breedy Panella TA RGB PIDSVICHUANNES, YAK RULITUAL RULISE «GIMERSIC» Y MATREXX 50 ADD-RGB tsILKOVAROVENENNENNENT. This model is recommended, as the budget for the purchase is small, but you want to take a better product. Comrade metal and hardness of construction on a pleasant level, the front cover is made of hardened fold (and not plastic). All tse bezperechnі perevagi.

There are 3 complete fans, and two more can be added up to 140 mm in diameter (the best in view). The case supports the Extended ATX motherboard, so the freedom of the solution when folded is secure. Here they come like a winder, and water factory cooling systems for 3-4 turntables.

The case is more comfortable in operation (which is typical for Deepcool cases), the front cover with roses in a handy place, the level of noise from the working fans is pleasant. Large video cards (up to 370 mm) and CBOs (systems of repeated cooling) with a height of up to 165 mm are naturally supported.

Vinga Barbarian V2

Barbarian V2 is another one of the best low cost PC cases. For all that, the singing charm in design is not spared. The front and side panels are covered with gaps and vikonan from yoke acrylic plastics of significant comradeship. On plastic, there are practically no undercuts, for accurate operation.

Barbarian V2 main feature — 7 installed coolers. Three of them are stitched on the front panel and taken away repeatedly through the air nozzles. You can figure out that you don’t need to stitch for a normal fence again, the temperature indicators of the need to develop a fight.

The cable management of the case does not cause any problems, it is not easy to fit the wires in a specially designed mounting groove, having taken care of the correct configuration, in any case you can vikoristovuvat whether or not you are a modern component.

One of the most beautiful cases in this category. In addition, in the new transfer of the installation maidanchiki, both for refrigerated cooling and for the factory «dropsy».

Be quiet! Pure Base 500DX Black

be quiet! well known in the Ukrainian market, the best brand representations in all price segments: from the budget to the hi-end solution. Pure Base 500DX is the «golden middle» of the assortment, and, at the same time, one of the most optimal cases for productive PCs.

There are three fans in total, one 140 mm Pure Wings 2, on Japanese bearings and low noise. Two more additional turntables can be placed on the front and one on the top panel.

After the storage of the main components, there is enough space to build a custom SRO with massive fanfare. Virobnik conveyed impersonal nuances that add to the comfort of operation. Saw filters are on magnets and are easily lifted, the stench is equipped with soundproofing devices, and the side glass cover, made from a hardened warehouse, is fixed on humic bushings and do not screw up.

Metal tovsty, over-farmed, hot quality of the collection of vіdmіnna. The Pure Base 500DX is a sharp and forgettable case that won’t let you down in your choice of accessories for a smartly hard PC. 9Style design High quality of materials and internal fittings (shasі, straight).

No significant shortfalls in their price segment.

Three installed 140 mm fans with yoke bearings.

Trouble-free installation of any type of SRO.

LIAN LI LIILCOOL II Mesh Argb

Stylny Beli Corps Iz thought out the internal culets (plus Maidanchiki for P’yati) Allowable length of the video card is 384 mm (so that the flagship NVIDIA Ampere can “become calmly”), the maximum height of the cooling tower is 172 mm. Everything is pushing against those who can choose a more productive system here.

One of its own chips Lian Li LANCOOL II Mesh — sliding doors from a sealed warehouse on hinges. The stench is fixed with one screw and it secures easy access for maintenance and cleaning of the saw. 12 kg But for a stationary productive PC, it’s faster than the win. You can not be afraid for the components in such a building — they are safe and cold, and well cooled.

NZXT H510 Matte White

H510 Matte White Garnier and functional, that’s why it’s part of our rating.

The very chassis in the middle, for the quality of implementation, but it does not reach the level of the front case, but for the ergonomics, the improvement and ease of access — maybe the best solution for hard professional PCs. Pіdsvіchuvannya harmonizes with the outrageous design and does not cause damage. The panels from the sealed warehouse are crushed so that they do not interfere with the intake of the installed cooling coolers.

Switching and cooling coolers are carried out through special software security NZXT Cam, it cannot be completely replaced by a mechanical hub controller, but the main software interface is secured with a lot of options.

For example, a highly visible cubic case, for the most non-standard computers. The Danish type of the world allows you to vikoristovuvat SZHO or I carry out cooling of non-standard remirovaniya, so, in similar cases, you can manually mount a pair of video cards for professional work with media content.

Vinga Limpid

Limpid — an extraordinary cubic case with an original mounting frame that is democratic, for a given type size, price list. All panels (rear crimson) are made from a metal hardened warehouse with a circular scheme for lighting ceramic tiles from the remote control. Also on the body is a hand-held handle for portability.

Obviously, for such a price, in the middle there were no compromises, looking at the average quality of fittings. So, the natural enemy of the used glass cases — saw. Regardless of the presence of filters, you may need to clean it often.

Silver Stone LUCID

On the front panel there is a USB Type-C, a bottom plate for the life block, a support for Micro ATX motherboards. Everything allows you to create on the basis of this case a functionally productive and one-hour compact PC for the accomplishment of any task.

Laying of cables is as accurate as possible, without the transfer of installation tools, in which we can cover up to 90% of the wires. The kit has ties, screws and plugs. The body is not damp, it is well ventilated. The kit has a total of two coolers and it is possible to install two add-ons, and a basic one for correct cooling.

Corsair 280X RGB Tempered Glass Black

Another «cube» for storage on the Micro ATX board, revealing the USB Type-C socket on the front panel. What a wonder for such a budget. In reshti — a miracle solution for a compact hard-wired computer for any business with an emphasis on design. GPU up to 300 mm, CPU cooler with radiator height up to 154 mm.

Set includes two turntables, two more can be added to the top cap. The cooler control module and water cooler through the case can reach even low noise levels.

When choosing a case for a skin-specific computer, it is necessary to insure a little dust. I, as for office and medium-productive systems without a video card, options with a complete BZ of the upper location are suitable, then for tighter PCs, a case with a different layout and possessions is needed, de emphasis is required to work at the lowest possible temperatures in the middle. Keep in mind that noise reduction systems can contribute to the efficiency of heating.

How to choose a computer case

Recommended case models

For those who don’t have time to read the whole article, I immediately give the recommended case models with a brief explanation.

The most common are Midi-Tower cases suitable for mounting ATX motherboards and smaller (Mini-ATX, Micro-ATX). They are great for most computers.

For an office computer (documents, Internet), it is best to purchase a case complete with a 400-500 W power supply. Among the quality power supply cases you can find on the market, I recommend AeroCool, Cooler Master, Zalman, Chieftec, Xigmatek, and ASUS (Vento). In this case, the most inexpensive AeroCool CS-1101 type with a 500 W PSU is suitable. Computer case AeroCool CS-1101 500W Black For an entry-level gaming computer (Core-i3 or Ryzen-3 + GTX-1050/1060), you can also take a case complete with a 500-600 W power supply of the same brands. As a minimum option, you can consider AeroCool V3X with a 600 W PSU. Computer Case AeroCool V3X Advance Devil Red Edition 600W For a mid-range work or gaming computer (Core-i5 or Ryzen 5 + GTX-1070), it is better to take a good power supply and a separate case separately. AeroCool, Zalman and Cooler Master cases are the best in terms of price/quality ratio. One of the most successful inexpensive models Zalman Z1 (Black and Neo). Zalman Z1 Black computer case For a powerful professional or gaming computer (Core-i7 or Ryzen-7 + GTX-1080), it is advisable to take a roomier case. It will allow you to place a long video card, a powerful cooler or a water cooling system and will provide better ventilation. Recommended brands AeroCool, Zalman, NZXT, Cooler Master, Thermaltake. Again, as a minimum option, I recommend AeroCool Aero-800. Computer case AeroCool Aero-800 If you want to understand why I recommend these particular models, to understand all the parameters of the cases, then read the article further.

You can download the program for calculating the required power of the power supply in the «Links» section.

The best computer cases in price/quality ratio

The models presented below make it possible to assemble a good home, office and even gaming machine and save some money.

TOP 5 best computer cases in terms of price and quality.

Deepcool Matrexx 70 Black

The Deepcool Matrexx 70 Black is a Midi-Tower computer case compatible with the latest motherboard standards.

Due to its size and internal layout, the platform is suitable for assembling a high performance machine.

The power supply is not included in this model and is selected at the discretion of the user.

The body of the device is made of 0.6 mm stainless steel, all possible vibrations and noises are minimized.

Equipment equipped with 9 expansion slots. The glass side window is complemented by spectacular lighting.

Specifications:

• Motherboard form factor — ATX/mATX/EATX/Mini-ITX;
• case size — Midi-Tower;
• CPU cooler height — 170 mm;
• length of the installed video card — 380 mm;
• housing materials — steel, tempered glass;
• drive slots — 2×3.5″, 2×2.5″;
• integrated cooling — 120 mm fan;
• front panel ports — 3×USB, audio;
• features — RGB backlight, dust filter, water cooling support;
• dimensions/weight — 228×492×475 mm/8.89 kg.

Benefits

• spacious housing;
• easy cable management;
• excellent blowing;
• seats for seven fans;
• stylish look;
• high quality materials.

Disadvantages

• little wheel space;
• expensive original styling accessories;
• is quite a noisy model.

Be quiet! Dark Base 700 RGB Black

Model with a standard size Midi-Tower is assembled from the highest quality components, which guarantees the impeccable performance of this case.

The platform allows you to assemble a universal computer with the potential to solve problems of any level.

Overall dimensions and features of this model allow you to create, among other things, a gaming system.

The power supply is not included in the kit — the user selects this structural element independently.

Be quiet! Dark Base 700 RGB Black is equipped with a pair of pre-installed fans with low noise level, the possibility of installing additional cooling equipment is available.

Specifications:

• Motherboard form factor — ATX/mATX/EATX/Mini-ITX;
• case size — Midi-Tower;
• CPU cooler height — 180 mm;
• length of the installed video card — 430 mm;
• body materials — steel, tempered glass;
• drive slots — 3×3. 5″, 3×2.5″;
• integrated cooling — 2×140 mm fans;
• front panel ports — 3×USB, audio;
• features — RGB backlight, dust filter, water cooling support;
• dimensions/weight — 241×519×544 mm/13.2 kg.

Benefits

• quality thick steel;
• excellent sound insulation;
• support for video cards of any size;
• the presence of a reset button;
• excellent manufacturer support.

Disadvantages

• front panel difficult to remove;
• few built-in fans;
• inconvenient installation/removal of glass.

Be quiet! Pure Base 500DX White

With a stylish white design, this PC case will appeal to users looking to maximize their PC’s performance.

If necessary, you can install a powerful system with water cooling, individualize the appearance of the case both inside and out at your discretion.

The dust filter system at the front and back of the housing is easy to remove and clean.

Be quiet! Pure Base 500DX White provides the ability to mount large coolers.

Spectacular side window made of extra strong tempered glass. The power supply is not included in the equipment.

Specifications:

• Motherboard form factor — ATX/mATX/Mini-ITX;
• case size — Midi-Tower;
• CPU cooler height — 190 mm;
• 368 mm graphics card length;
• housing materials — steel, tempered glass;
• drive slots — 2×3.5″, 5×2.5″;
• integrated cooling — 3×140 mm fans;
• front panel ports — 2×USB, audio;
• features — RGB backlight, dust filter, water cooling support;
• dimensions/weight — 232×463×450 mm/7.8 kg.

Benefits

• relatively quiet operation;
• good ventilation;
• beautiful design;
• quick-release dust collector;
• high build quality.

Disadvantages

• hard to remove front panel;
• does not support vertical mounting of graphics card;
• few USB ports.

NZXT H510 White/black

The model in spectacular black and white colors is positioned by the manufacturer as an ideal basis for creating a home or gaming computer.

The NZXT H510 White/black platform is equipped with boxes for 2.5″ and 3.5″ drives, it is possible to connect a graphics card up to 381 mm long.

Installed 120mm fans effectively remove heat from hot components in the assembly.

The possibility of integrating a liquid cooling system is provided.

Spectacular side window made of extra strong tempered glass. The power supply is not included in this model.

Specifications:

• Motherboard form factor — ATX/mATX/Mini-ITX;
• case size — Midi-Tower;
• CPU cooler height — 165 mm;
• 381 mm graphics card length;
• body materials — steel, tempered glass;
• drive slots — 3×3. 5″, 2×2.5″;
• integrated cooling — 2×120 mm fans;
• front panel ports — 2×USB, audio;
• features — dust filter, water cooling support;
• dimensions/weight — 210×460×428 mm/6.6 kg.

Benefits

• ease of installation;
• compact dimensions;
• tempered, heavy-duty glass;
• robust rubber feet;
• modern design.

Disadvantages

• noisy complete fans;
• no internal vibration protection;
• Only two USB ports.

Cooler Master MasterCase H500M (MCM-H500M-IHNN-S00) Iron Gray

Featuring a striking black and gray color combination, this model stands out for its metal construction for high reliability and rigidity.

Adaptive RGB lighting on the front fans and tinted tempered glass complete the premium look of this case.

Cooler Master MasterCase H500M (MCM-H500M-IHNN-S00) Iron Gray is a Midi-Tower platform with seven expansion slots and supports video cards up to 412 mm long.

It is possible to mount the graphics module in a vertical position.

An optional ATX standard power supply can be used for the power supply.

Specifications:

• Motherboard form factor — ATX/mATX/EATX/Mini-ITX;
• case size — Midi-Tower;
• CPU cooler height — 190 mm;
• 412 mm video card length;
• housing materials — steel, tempered glass;
• drive slots — 2×3.5″, 2×2.5″;
• built-in cooling — fans 140 mm, 2×200 mm;
• front panel ports — USB, audio;
• features — RGB backlight, dust filter, water cooling support, graphics card holder;
• dimensions/weight — 248×546×544 mm/14.3 kg.

Benefits

• durable tempered glass;
• choice of front panel type;
• detachable bracket for top fans;
• quiet complete cooling system;
• very heavy «monolithic» body.

Disadvantages

• few lighting options;
• not enough space for wires;
• to install 3. 5 disks, you must remove the front of the case.

Case with power supply

If you are building an office or home computer, you can save money and purchase a good case complete with a power supply.

3.1. Power supply capacity

Cases for office and home computers can be equipped with power supplies with a capacity of 300-600 watts. In small cases for media centers, the power of the power supply can be only 100-250 watts, which is quite enough for watching videos, but obviously not enough if you want to install a powerful video card in order to play on the TV screen.

A 400-watt power supply is enough for an office computer. For a home multimedia computer, the power supply should be 450-500 watts. For a powerful gaming computer, at least 600 watts is desirable.

3.2. Power supply capacity calculation

The power supply capacity can be calculated manually. To do this, you need to find the power consumption of all computer components on the manufacturers’ websites and add them up. To this amount, you need to add 15-30% for higher reliability and to avoid voltage drops at peak loads, to which video cards react very painfully.

But there is a better way! The power supply power can be calculated using the special program «Power Supply Calculator». It also allows you to calculate the required capacity of an uninterruptible power supply (UPS or UPS).

The program works on all versions of Windows with «Microsoft .NET Framework» version 3.5 or higher installed, which is usually already installed by most users. Download the program «Power Supply Calculator» and if you need «Microsoft .NET Framework» you can at the end of the article in the «Links» section.

3.3. Power supply configuration and location

Note the types and number of power supply connectors. As for its location, it can be upper or lower.

The lower position of the power supply is considered more progressive, but in general it does not matter. But if you get a large case without a power supply and its location is provided in the lower part of the case, then choose a power supply with longer wires, otherwise they can be connected with a stretch.

Read more about power supplies in the article «How to choose a power supply».

Case Manufacturers

Some manufacturers only produce cases without power supplies, some only with power supplies, and some make both.

5.1. Manufacturers of cases without power supplies

If you plan to purchase a power supply separately, then a high-quality case from one of the most popular manufacturers will be a good addition to it: Chieftec, Cooler Master, Thermaltake.

Not so long ago, well-known manufacturers of components for enthusiasts entered the computer case market: Corsair and Zalman, which I also recommend.

If you are looking for a more economical, but still high-quality case, pay attention to the trademarks: AeroCool and Antec.

It is worth noting that there is no obvious division between brands by price, when the cases of one brand were only expensive, and the other one was only cheap. Therefore, when choosing a housing, you can consider the housings of all manufacturers listed here.

5.2. Manufacturers of cases with power supplies

If you decide to purchase a case with a power supply, then a case made by Cooler Master or AeroCool is a good choice.

A more economical, but quite acceptable option would be to purchase a case of brands: Foxconn, FSP, InWin.

I recommend limiting yourself to the brands listed here, since they use power supplies of more or less acceptable quality.

Instead of preface

As in many areas, computer equipment is subject to strict standardization and typification. This not only allows you to achieve the required operating parameters from certified components, but also allows you to assemble the necessary configuration from a wide range of devices on the market by various brands.

Naturally, there is no perfect standard, just as there is no single «correct» frame size. Types and their characteristics are aimed, first of all, at ease of use. At the moment, there are 25 sizes of computer cases — both widely used and purely niche solutions.

The latter are the subject of interest of highly specialized specialists, so they were not included in our description. All types and you, friends, are likely to be uninteresting. And so, briefly and to the point.

Types and sizes of cases

Computer cases are divided into horizontal (Desktop) and vertical (Tower). But both of them can have different sizes.

6.1. Horizontal cabinets

Horizontal cabinets used to be used mainly in offices to save space and monitors were installed directly on them.

These cases can now be found in some supermarkets, but they are mainly used to assemble multimedia centers that can be placed in a TV stand.

Horizontal cabinets are available in the following types:

• Slim-Desktop — slim cabinet
• Full-Desktop — standard cabinet

6.

2. Tower cases

Today’s computers are mostly built using tower cases. Usually they are installed on a special stand or just on the floor.

Tower cases are of the following types:

• Micro-Tower — miniature case
• Mini-Tower — low case of legacy format
• Midi-Tower — the most common format
• Full-Tower — large case for gaming computers
• Super-Tower — extra large case for powerful computers and servers

For office and home computers it is better to use the most versatile Midi-Tower cases. For powerful gaming computers that install large video cards and coolers, it is advisable to use more spacious Midi-Tower or Full-Tower cases. They are better organized placement of components and ventilation.

Fractal Design Define S Black

With its clear shape and transparent side door, the case looks unusual and stylish. High-quality ventilation: two coolers, low noise, also suitable for liquid cooling. Convenient cable management. An impressive amount of interior space and an affordable price.

Fractal Design is a Swedish company well-known in Russia

Motherboard form factor

Depending on the size, the case can accommodate motherboards of different sizes. Usually, ATX format motherboards and less (MicroATX, Mini-ITX) can be installed in Midi-Tower cases. In Mini-Tower cases, you can install a motherboard no larger than MicroATX, and in cases for multimedia centers Mini-ITX. Full-Tower cases can accommodate large E-ATX and XL-ATX motherboards.

All cases have brackets for supported motherboard formats. Which motherboard form factors are supported by a particular case must be indicated on the website of the seller and the manufacturer of the case.

For office and home computers, I recommend purchasing a case that supports ATX motherboards, even if you purchase a smaller motherboard. This will provide more choice of motherboard in the event of a replacement, as well as the installation of larger components and better ventilation in the case.

Ease of maintenance

In this context, everything is simple — you want to be able to vacuum dust filters without dismantling the case.

Also, for the sake of ease of maintenance, I dismiss the LSS

The liquid cooling system will make the computer much more expensive and require additional fuss, otherwise a new life will start in the coolant, an incomprehensible slimy mass will clog the microchannels and (or) the liquid will leak / evaporate.

I have already spoken about the stove under the processor and I want to give a couple of examples where this problem is solved.

1) Chassis with motherboard rotated 90 degrees:

Convection and fans work together. In tests for cooling efficiency, this case showed very good results.

2) Horizontal layout of the motherboard

Everything is clear here — hot air rises from the processor and video card to the top. Components do not heat each other.

3) Flip cases

The motherboard is rotated 180 degrees, that is, the video card is located above the processor and no longer heats it.

4) You can use a riser to connect a video card

So the video card can be placed in the part of the case farthest from the processor and the components will heat each other less.

He is gone. But something came close to my idea of ​​an ideal layout

Not an Apple fan, but I like the Mac Pro. There are only blowers and component heatsinks are installed in the airflow from them.

Someone is crowdfunding to raise money for a clone of this case, but they will not be able to implement the most important feature — flow radiators.

As a result, it will turn out like with fake Christmas tree decorations — they look like real ones, but they do not bring joy (cooling).

I don’t want to end the article on a sad note, so I’ll tell you about the options for solving the problem:

• Place the case where it can’t be heard

  No comment. A long cable to the monitor and a USB hub will allow you to take the system unit even to the balcony. Or in a home server room. At the same time, this will partially solve the problem with dust. Another thing is that such an opportunity should be taken care of even at the stage of repair.

• Choose from available options

  If you search, you can still find a case with decent dust insulation. There is no need to rely on soundproofing, so we choose the quietest components. With a lot of empty space inside, you also have to put up with it.

For myself, I chose a mATX case with a horizontal motherboard.

• Do it yourself

  You can do without the case and hang all the accessories on the wall. Of course, here you also need to choose quiet options for cooling the video card and processor. If you hang the motherboard with the connectors down, then the components will not heat each other, and convection will help cool. The dust problem will remain, but on an open stand everything is visible and easy to clean.

I didn’t do this because of laziness and having a curious cat.

• Small-scale production

  Here you can do everything yourself, but I did not find where you can get a suitable thermosyphon.

Used for cooling LED lighting systems, inexpensive. The width (which I managed to find) is up to 30 centimeters. The thickness of the base is from 6 millimeters. In some cases, it can be ordered already anodized.

This radiator profile can also be used as a cabinet wall.

Through the thermosyphon:

… install the motherboard with the processor.

We remove the standard cooling system from the video card and with the help of a riser, through a thermosyphon, we attach it to the same radiator. You are wonderful! Actually, not really. It confuses me that the contact of the thermosiphon and the radiator profile may be insufficient. Of course, here you also need to use thermal paste, but is this enough?

In addition, several fans can be installed from below to help with the load.

According to my estimates, a 30 x 30 cm radiator profile with low airflow should be enough for 300 watts of thermal power from the processor and video card.

That’s all, I hope this article will help someone.

PS

If someone knows how to find a ready-made thermosiphon, please write in a personal or in a comment.

PPS

Thanks to evilme for the article Learning to write on Habr. It is much more convenient to write this way than in a web editor or Word, followed by transfer to habr. On my own behalf, I’ll add that I recommend installing the “Russian — Code Spell Checker” extension to combat the inevitable blunders.

Cooling system

From the point of view of cooling, cases with a metal grill front panel have proven themselves well. If you are building a powerful computer, I recommend paying attention to such models.

9.1. Fans and vents

Older cases used 80mm fans. This solution can still be found in some cheap models. It is desirable that the rear panel of the case provide for the installation of a 120 mm fan, as it is quieter and more efficient. One fan is usually included with the case and in most cases this is enough, but you can install additional ones if necessary.

Some more expensive cases may have additional fans in the front, side, top, and even bottom of the case. There may also be many ventilation holes. Such cases are intended mainly for powerful gaming computers and require a reasonable placement of quiet fans. For ordinary home computers, extra holes, especially in the top case cover, can allow excess dust to enter and sometimes even spill something.

9.2. Dust filters

Cases can also have dust filters, which is generally good, but requires regular cleaning or replacement, otherwise they will only interfere with cooling. In principle, they can be removed at any time or replaced with homemade ones.

Front panel connectors

The front panel of the chassis (front or side) can have various connectors for connecting external devices. It is desirable that on the front panel of the case there are 2 USB connectors and 2 audio connectors for connecting headphones and a microphone.

How convenient the location of the connectors will be for you depends on where and how the system unit will stand.

Horizontal

In our country, this type of case is not very popular among users, but in Western countries it has become widespread. The advantage is that this configuration takes up a little less space: the monitor can be placed directly on the system unit.

The most popular types would be:

• Desktop (desktop) — 533x419x152 mm;

• FootPrint (floor) — 408x406x152 mm;
• SlimLine (thin) — 406x406x101 mm;
• UltraSlimLine (ultra slim) 381x352x75 mm.

External bays

Almost all cases have 1 to 4 external 5.25″ optical drive bays. If you plan to install several of these devices, such as a Blu-ray drive and a cheaper DVD-RW drive for everyday work, then pay attention to this. Also, these compartments can be used to install control panels for various additional devices. Usually one such compartment is enough, but it is still desirable that there be several of them.

The case can have 1-2 external 3.5″ bays that were previously used to install a drive. Now they are not needed, but if there is such a compartment, then you can install a card reader for reading memory cards or an additional socket with some other connectors. But usually this is not necessary.

RAM, SSD and HDD — the first contenders for the title of «bottleneck»

There are still questions on the forums: «I have 4 GB of RAM (often also DDR2) and my toys do not start or slow down: … , what should I do?». After reading the tests, you can see that a modern PC requires a minimum of 8 GB of DDR4 memory! And this is if you do not play powerful games and do not draw in Photoshop or Corel. Otherwise, you need at least 16 GB DDR4. I must say right away that for most gamers 32 GB of RAM is not needed! Game tests show that they consume up to 12 GB of RAM. The exception is games in 4K resolution.

The next moment is the frequency of RAM and dual-channel mode. They are critical for Ryzen processors. At Intel, this dependence is not so pronounced.

It is not recommended to buy sticks of RAM from different manufacturers, they run the risk of simply not starting together, while individually they will work fine! If you still took the risk, then you need to check the coincidence of their frequencies and timings. There are already ready-made kits on sale, but they usually cost more than similar memory modules separately, and also almost always have beautiful heatsinks, which in fact are ordinary decoration.

Many memory modules can be overclocked, for example, 8Gb DDR4 2400MHz Crucial (CT8G4DFS824A) can easily go from base 2400MHz to 3200MHz. Overclockability is easiest to determine by reviews, and it does not always depend on the price tag. Most often, they overclock memory modules from Samsung (I chose Crucial due to the lower price).

Transferring games from HDD to SSD increases FPS. The most interesting thing is that this rule even works with online games, where a stable Internet connection is crucial.

If the paging file is located on the SSD, then this partially helps with a small amount of RAM.

Sometimes cheap SSDs are slower than HDDs (hard drives). This is due to the fact that they can be assembled from rejected components or returned from repair.

Previously, hybrid hard drives were actively sold, with an SSD for the operating system and an HDD for everything else. Now they are almost gone, because there is no point in them! They were a transitional solution, a thing of the past. In some stores, consultants may offer you to buy such a disc if it is lying around in their warehouse.

When buying an SSD, you should look at the volume, now it is at least 240 GB, the controller (affects the speed and service life), as well as speed tests and reviews. There is another interesting parameter — the declared resource, measured in Terabytes (TB). It shows how much information can be guaranteed to be written during the life cycle of the drive. Hence the important point for torrent lovers, it is not recommended to use an SSD for torrents, any hard drive is suitable for this purpose. You should not buy «noname» components from Ali or other stores. They are now actively advertised, but their reliability leaves much to be desired.

Internal bays

Most cases have 4-6 internal 3.5″ bays for conventional hard drives. Usually this is enough, but if you plan to install several disks, then please note that it is advisable to install them through one, i.e. leave an empty space between them. At the same time, if the case is small and the video card is long, then it may interfere with the installation of a second disk or they will have to be placed back to back one on top of the other.

Some mostly compact cases may have 2.5″ bays that can accommodate an SSD or laptop hard drive. In standard cases, you will have to purchase a special mount for this.

The most modern and sophisticated cases have one common 5.25″ rack with the ability to mount different disks in arbitrary places. For this, additional mounting frames are used, into which 3.5″ or 2.5″ discs are inserted. Such a frame can be installed anywhere in the rack, which is very convenient. But, such cases are more expensive and are intended mainly for professional and gaming computers.

Expansion Card Slots

ATX motherboard cases typically have 7 expansion card slots, while MicroATX motherboards have 4 expansion card slots to match the number of expansion slots on these motherboards. Smaller or larger cases may have a different number of slots. This is usually not a problem, but keep in mind that the number of slots on the case must be at least as many as the number of slots on the motherboard.

Case design

Various decorative elements can be used in the case design. The case may have a front door that covers all or part of the front panel, under which there may be an optical drive, a power button, additional connectors. This makes the appearance more aesthetic, but the use of elements behind the door is extremely inconvenient, since it will constantly have to be opened.

One of the side covers of the housing may have a transparent window. These cases are intended mainly for enthusiasts. If the system unit is assembled from powerful beautiful components, wires do not stick out anywhere, additional lighting is used inside the case and it stands in a conspicuous place, then all this may look interesting.

As for the illuminated fans, although it looks beautiful at first glance, it can annoy those around you. Think about where and how the system unit will stand and in which direction the light will go. He should not hit anyone in the eyes, especially in the dark.

Enclosure material

Most enclosures have a steel frame and front panel made of plastic or a combination of plastic and metal mesh.

Frame metal thickness may vary. In cheap cases, this is usually 0. 4-0.5 mm, such metal bends easily and the case can rattle. It is better to choose cases with a metal thickness of 0.55-0.8 mm.

Some more expensive cases are made from aluminium. Aluminum cases have a more solid appearance, but this has little effect on its other indicators.

Case color

As for the case color, black or black-and-silver cases are the most versatile, as they blend well with other computer devices, modern home appliances and interiors.

I don’t recommend purchasing cabinets with a glossy plastic panel, as it easily scratches, smudges, attracts dust and quickly loses its appearance.

But the most important thing is that you like the case. Then looking at it and pressing the power button you will get aesthetic pleasure.

Setting up filters in the online store

1. Go to the «Cases» section on the seller’s website.
2. Select recommended manufacturers.
3. Select the capacity of the power supply.
4. Set other important parameters for you.
5. Browse positions sequentially, starting with the cheapest ones.
6. If necessary, check the missing data on the manufacturer’s website.
7. Buy the right size and design model.

So you get the best value for money enclosure that meets your requirements at the lowest possible cost.

Rating TOP-15 best computer cases

Page navigation:

Gaming PC with the best case of 2022

Best PC case in comparison

Gaming PC case — plenty of room for equipment

A gaming PC needs a lot of hardware to play the game at all. A gaming PC case is needed to house all the important things. This occupies the entire hardware, so that the individual components can be perfectly matched.

However, not only does the gaming PC case have room for hardware, but the stylish design is an eye-catcher in any room. Some models are designed to look into the interior, often providing additional lighting to express the interior even more.

Sort by — Price ascending Price from high to low

1.5-excess

Game PC CASAIR CRSAIR CC-

63-WW graphite series 780T

• Rounded angles
• Artistic design

fixed side cover

.0026

Case Corsair Gaming PC CC-

63-WW Graphite Series 780T Gaming PC Case Thermaltake Core P5 Wall Enclosure PC Case Sharkoon VG4-W with Windows Case Case Corsair Gaming PC CC-

85-WW

Carbide Series

Gaming PC case NZXT CA-S340MB-GR Mid Tower Chassis Price Check Price Check Price Check Price Check Price Check price comparison result
Comparison note

Best recommendationtest-vergleiche. com1.5excellentGaming PC case

Home Producttest-vergleiche.com1,6goodGaming PC case

value Siegertest-vergleiche.com1.8goodGaming PC case

Home Producttest-vergleiche.com1.9GoodGaming PC case

Home Producttest-vergleiche.com2,1goodGaming PC case

manufacturer corsair Thermaltake

Sharkoon

corsair NZXT Size 6.8 x 28.7 x 60.2 cm 64.8 x 66 x 18.3 cm 20 x 44.5 x 43 cm 51.8 x 22 x 47.4 cm 44.5 x 43.2 x 20 cm weight 11.0 kg 14.0 kg 3.5 kg 6.0 kg 7.0 kg USB interfaces 4 x USB audio output 2 x USB, audio output 1 x USB 3.0, 1 x USB 2.0, 2 x Audio 2 x USB 2.0, audio output 2 x USB 3. 0, I/O panel, 1 x Audio fan size 2 x 140 mm intake fan Length up to 480 mm 2 x 120 mm 3 x 120 mm 2 x 120 mm, 1 x 140 mm, 2 x 140 / 120 mm water cooling Features Three-stage fan control provides pleasant noise when playing. It is located, along with the USB ports, on the front panel. Thanks to the modular design, the housing can be installed horizontally or vertically or mounted on a wall. A large picture window provides a unique view of the interior. LED fan already pre-installed front and rear. The fan in the front contains a practical dust filter. In addition to the modern look, the case boasts space for three built-in fans. In addition to the direct airflow design, very good cooling performance is achieved. The front is equipped with a cover that optimally conceals the cables. The interior provides ample space to accommodate various hardware components. Benefits
• rounded corners
• Artistic design
• Fixed side cover
• Three-stage LED diode
• Optimum noise and cooling
• SSD compact bays per side
• large radiators available
• practical wall bracket
• Cable channels available
• open design
• modular design possible
• various settings
• quick release
• Cable management system
• generous space
• Pre-installed dust filter
• Possibility of installing a card reader
• Side piece from Arcyl
• Front dust filter
• rear dust filter
• Fan Speed ​​Controller
• large mounting compartments
• striking design
• panoramic window
• Three-stage fan control
• compact design
• modern design
• pre-installed fans
• built-in dust filter
• invisible power button
• large space inside
Conclusion In addition to the rounded corners, the tower is characterized by a modern and trendy design. It holds a total of nine drives accommodating various ports. Water-cooled and radiators up to 480 mm long can be easily installed. This allows you to achieve the best cooling performance during the game. Open side panels make it easy to install various components such as a heatsink or graphics card. The length of the cable for power supplies should not exceed 25 centimeters. Large picture window provides insight into the interior of the case. The side panel is removable, which makes it easy to install the necessary equipment. The case captivates with its simple appearance, which was very minimalist and has a geometric shape. The practical window gives an idea of ​​the interior. To Amazon offer

Our comparison chart for gaming pc comparison does not replace one gaming pc gaming pc test in which 9 gaming pc test winner1281 can be recommended. In order to increase the added value for our readers, we may link to an external PC gaming pc test trusted sources. Only you decide which model your personal Gaming PC winner is.

Gaming PC case — high degree of individuality for gamers

content

• Gaming PC case — high degree of individuality for gamers
• What is a gaming case?
• What parts are included in a gaming PC case?
• Important purchase criteria for the gaming case
• The current price comparison for the gaming case
• Advantages and disadvantages of the gaming case
• Gaming PC verdict Stiftung Warentest
• Which famous gaming PC manufacturer is there?
• Gaming case summary

Players need a variety of accessories to play different games. In addition to one gaming keyboard, one 4k gaming monitor or gaming mouse, the gaming computer also plays an important role. A gaming PC consists mainly of one 9The 1280 Gaming PC Case houses essential hardware such as hard drives and air coolers, to name but a few. Without a gaming PC, it will be almost impossible for gamers to play games because the individual components in the case must be perfectly matched. The cases impress with their modern and stylish appearance, while at the same time providing enough space inside to fully hold the equipment. Many models from Gaming PC Case In addition, they have a practical panorama window that gives a wonderful view of the interior. Just like a human, it also depends on the internal values ​​of the gaming PC to ensure a smooth gaming experience. Accordingly, it should be chosen so that it can easily meet all requirements.

At a Glance

• Bey Einem ATX PC Gaming Case A distinction is made between the Midi Tower and the Big Tower. The larger the gaming case, the more other components can be placed. The size depends very much on your own needs and game requirements.
• Das Play Housing There must be several ways to establish a lot of fans. This is very important for high-demand gaming to ensure sufficient cooling.
• Take a look at one The gaming PC case ranges from modern to simple. Many also offer stylish color components while others have a classic look. Since the appearance is in the eyes of the beholder and of course the respective manufacturer, there are no limits to your own wishes.

Der ATX PC Game Interface Comparison from test-vergleiche.com is a useful little guide that explains the different features of best game case shows and compares with each other.

What is a game case?

一 Gaming PC case is an essential component of any gamer dar. In addition to the cool look, it offers the ability to assemble various hardware components to fit all the requirements of the game. The distinction is made in the case of a gaming PC between:

Midi Tower

Midi Tower is a classic PC gaming model. As long as you don’t need to install multiple video cards or hard drives at the same time, this case is enough. Generally, Midi Tower is designed for micro-ATX and ATX motherboards.

Large Tower

As the name suggests, this is a large case that can contain multiple graphics cards or air coolers. They are also designed for ATX motherboards, but have enough room to install a variety of equipment.

The choice of Gaming PC case therefore depends entirely on their own needs. Therefore, when buying, you should consider in advance what requirements must be met with a gaming case.

Note: Gaming PC case is available from different manufacturers and therefore also in individual versions. Housing is an important consideration, especially for gamers, as the various components can be perfectly adapted to their own wishes and needs. The appropriate game case size depends in part on the requirements and possible use cases. Therefore, the case must be chosen in such a way that the individual components can be replaced and, therefore, many years of use of the case.

Top product Gaming PC case :

Sharkoon VG4-W Blue PC case with windows (2x USB 3.0, 2x USB 2.0, ATX) black / blue

• Front I/O 3 .0 (built-in power plug 19), 2x USB2.0, 2x Audio
• Cable system
• Acrylic side panel
• Quick mounts for two optical drives and three hard drives 3.5
• Scope of delivery: ATX VG4-W chassis blue; 1x slot cover; Screw; mounting material

What components are included in a gaming PC case?

一 The Gaming PC Case is an important part of computer accessories because the case houses all the important components that make up a computer. A PC needs various essential components without which it cannot function. At the same time, there are extensive components that can be added as an option.

The following required components are required:

• Game Power Supply

Which additional components come into play depends partly on the requirements of the game, but also on the size of the game Gaming PC case c. That’s why it’s absolutely essential, especially before buying, to think in advance about what the interior design should look like and what is ultimately needed to ensure smooth gameplay.

Suitable for Gaming PC Case
Asus ROG Strix Best Gaming Motherboard


Asus ROG Strix Z270F 1151 Gaming Motherboard Socket (ATX, Intel Z270, Kabylake, 4x DDR4 Memory, USB 3.1, M.2 interface)

• Aura Sync RGB LED lighting and 3D printing modules for maximum customization
• Next- Gen Connectivity — Two built-in M.2 slots for PCIe 32 Gbit/s bandwidth and USB 3. 1 Type-A and …
• ROG SupremeFX Audio — Proven dual headphone amplifier audio performance enhanced by Sonic Studio III and Sonic Radar III
• Gaming Network Performance — Industry Leading Intel Gigabit Ethernet, LANGuard and GameFirst Technologies
• Package Contents: 1x ROG Strix Z270F Gaming motherboard, 4x SATA 6Gb/s cable, 1x SLI HB Bridge, 1x CPU installation tool, 1x RGB LED …

Important purchase criteria for the gaming case

Das The gaming housing should be chosen so that it can ideally accommodate the individual required hardware components. When making a purchase decision, different comparison sites be very helpful. In our comparative test, we give below the review of the most important purchase criteria:

Criteria for purchases

804

28 If you only want to install limited hard drives or cooling options, you can easily mount it with the Midi Tower. However, for higher gaming requirements, a larger tower should be chosen, as not only multiple hard drives, but also various cooling options can be fully integrated.

• Cleaning

Who regularly Gaming PC case If you want to clean it to protect your equipment, you must choose a case that provides enough space. The best way to do this is to use a large tower as the interior has a generous volume for equipment placement and cleaning.

Those who often move their computer should already ATX PC gaming case ensure that it is light in weight. The larger the case, the more components can be placed and more weight will be moved. That’s why you have to pay attention to the appropriate material as well as the thickness of the material and perhaps make a good compromise in terms of size, material and internal surface.

Many models of the Gaming PC case are equipped with a practical panoramic window. Not only does it provide a visually appealing effect, but it can also be frequently opened for minor repairs or maintenance inside a gaming PC chassis.

• Stabilität

When buying, make sure that the material is very stable. Especially if the gaming PC case, including the hardware, is often moved or carried, it must be very stable, otherwise the material will flex too quickly. The hardware inside can also slip out and reduce the fun many times over.

Our The Gaming Chassis Comparison Test gives you an idea of ​​the extensive hardware options. Here, five different game cases were considered a little closer and compared. PC Case Corsair can on our Comparison Test is not just cool and modern design like Compare Winner Quite convincingly, its excellent recording capabilities tailored to individual equipment were also convincing. The Sharkoon Gaming case was chosen as the price-performance winner as it also has excellent recording capabilities, a large panoramic window and practical cable management. Even if it’s The play housing offer is very large, in terms of its design, the corresponding housing differs very little. Up to Gaming PC case ordered online or bought from a specialized store can be different comparison tests or Test winner sea Stiftung Warentest gaming housing if one Test was performed to help. Also great help in choosing can Gaming PC experience whether friends and acquaintances or different customer reviews.

Advantages and disadvantages of the gaming case

Advantages

Enough space

Intellectual cable guides

The number of available front connections

Individual size

Optional installation of the water occal system 9000 9000 9000 Pali Disadvantages

depending on installation high noise level

difficult cleaning in a small case

Must have basic knowledge

Stiftung Warentest gaming PC verdict

Stiftung Warentest has in the field Gaming PC Housing gaming PC cannot be detected.

Which known manufacturers for Gaming PC Case are there?

Among the best known manufacturers for Gaming PC Case includes:

Best selling gaming PCs at the moment:

Bestseller 1

Review 5.246

Sharkoon TG4 RGB PC case

• give the TG4 a stylish…
• Compact body design: The body design is deliberately stripped of unnecessary and as compact as possible.
• Two chassis options: The TG4 is available with four addressable RGB LED fans or four single color LED fans…
• Full lighting control: RGB variant TG4 comes with 4-position RGB control for addressable LEDs.
• Corsair Carbide Series 275R gaming PC case (Mid-Tower ATX with tempered glass window, side window, clear interior layout and versatile …
  • Stunning tempered glass side cover. The attractive tempered glass side cover professionally displays your system. ..
  • Clear and minimalist design: clear lines, rounded edges with soft accent lighting.
  • Developer’s Interior Layout: A simple and intuitive interior layout allows for quick and easy system setup.
  • Versatile cooling options: room for a 360mm radiator at the front, a 240mm radiator at the top and…
  • Expandable storage capacity: Sturdy steel drive trays provide enough space for additional drives.

  Bestseller 3

  EMPIRE GAMING — Diamond — Computer Case Gamer- ARGB Medium ATX Tower — Diamond plexiglass front and safety glass side door — 4 …

  • Medium case for mini ITX, micro cases -ATX, ATX.
  • RGB address fans RGB incl. 3 pins: 3 x 120mm front, 1 x 120mm rear.
  • Addressable RGB Technology (3 Pin / 5 Volt) Compatible with ASUS Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light Sync and ASRock …
  • 4 Hard Drive Slots
  • Compatible Water Cooling (120mm / 240mm )

  Video Comparison Gameplay Winner Corsair 780T Hardware Component Assembly (English)