Dayco Vs Gates Vs Continental
It is important to regularly maintain your vehicle to keep it running smoothly and to avoid costly repairs down the line. One key component of regular maintenance is replacing the timing belt. Timing belts are typically replaced every 40,000 to 60,000 miles, so it’s important to know which brand to trust.
So, what are the best timing belt brands, and how do you pick one? As per our experience and research, Dayco, Gates, and Continental (also known as Contitech) are among the best brands. But how do these three big players of the Automotive timing belt compare with each other, and which one has the edge? To help you decide we’ve put together a comparison of Dayco vs. Gates vs. Continental to help you decide.
Table Of Content
Dayco Vs. Gates Vs. Continental (Table)
| Brand | Dayco | Gates | Continental |
| Built | Neoprene rubber | Nitrile | Rubber and polyurethane. |
| Warranty | 125,000 miles | 30,000 miles | 60000 miles |
| Appearance | Rounded | Square | Rounded |
Dayco Vs. Gates
Dayco and Gates. Both brands offer high-quality products backed by years of experience and research. So, which one should you choose for your vehicle?
Here’s a quick comparison of Dayco and Gates timing belts:
Price
To start, let’s look at each brand’s prices. Dayco timing belts are typically cheaper than Gates timing belts. However, this does not mean that Dayco belts are of lower quality. They generally are just as good as Gates belts, if not better.
Built Quality
Dayco timing belt is made from a high-strength, heat-resistant Neoprene rubber material designed to withstand high-performance engines’ rigors. It also features a reinforced tooth profile that is engineered to resist wear and tear. As for the Gates belts, they are made with Nitrile, a synthetic rubber compound that provides superior resistance to wear and tear, as well as oil and heat.
The Dayco belt also had a slightly different profile than the Gates belt. The Gates belt has a rounded profile, while the Dayco belt has a more squared-off profile. Though it doesn’t make that much of a difference in performance, it’s something to keep in mind.
Design
The Dayco belt was a little bit thinner than the Gates belt. The thinner belt means less surface area for the engine’s power to grip onto. This results in less power being transferred to the wheels, making the belt more susceptible to slipping.
Warranty
One major difference between the two brands is the warranty. Dayco offers a longer warranty on their timing belts than Gates does. Gates Timing Belt such as Roadmax™ MV belts come with a meager 30.000 miles warranty, while Dayco timing belt’s warranty is 125,000 miles, the highest warranty coverage you can get for a timing belt.
Dayco Vs. Continental
Price
Regarding price, Dayco belts are typically slightly more expensive than Continental belts.
However, it’s important to remember that prices can vary depending on the specific model and size you’re looking for.
Built Quality
Dayco belts are made from Neoprene rubber, while Continental belts are made from high-quality Rubber and polyurethane. Both materials are designed to withstand high temperatures and extreme tension, so you can rest assured that either brand will do the job.
Design
Continental timing belts feature a unique tooth design that makes them more durable than other brands. The belts are resistant to oil and heat, so you can be sure they’ll last for a long time. But the main downside of Continental timing belts, when compared to Dayco belts, is that they tend to stretch more over time, which can cause them to slip or break.
Warranty
Dayco offers a stunning warranty of 125,000 miles on all its products, while Continental offers a 60,000 miles warranty. Another important difference is that Dayco offers a warranty on labor costs incurred for replacing a defective product, while Continental does not.
This can be significant cost savings if you need to have a professional mechanic install the new part.
So, when it comes to warranty coverage, Dayco wins hands-down over Continental.
Gates Vs. Continental
Price
Continental belts are usually less expensive than Gates belts. However, they’re not always made from the same high-quality materials. This means that they might not last as long as a Gates belt. But if you’re on a budget, Continental is a good choice.
Choosing between Gates and Continental timing belts comes down to personal preference. If you want the best quality belt, go with Gates. But if you’re working with a tight budget, Continental is a good option.
Built Quality
Gates Timing Belts have a higher tensile strength than Continental Timing Belts and a higher resistance to stretching than Continental Timing Belts. As a result, Gates timing belts are less likely to break over time.
Continental timing belts are made from a high-strength material to withstand high temperatures and heavy loads, but they are not as durable as Gates belts.
Warranty
Although Continental belts are slightly behind when compared to Gates belts in terms of built quality or durability, when it comes to warranty, Continental belts do have the edge. Continental belts offer 60,000 miles of warranty coverage, while Gates belts come with 30000 miles of warranty coverage.
Final words
The timing belt is responsible for ensuring your engine’s pistons and valves are in sync. If the timing belt were to break, it would cause significant engine damage and could leave you stranded on the side of the road.
So, which belt is better, Dayco vs. Gates vs. Continental? In my opinion, it’s a close call. All of these belts are good quality, and they all have their pros and cons. Most importantly, Dayco, Gates, and Continental have slight differences that make them suitable for different purposes.
If you’re looking for a belt that’s a little thinner and quieter, go with the Dayco belt. But if you’re looking for a belt that’s a little thicker and has a better grip, go with the Gates belt.
Lastly, the Continental belt is a better choice if you need a more durable belt and resistant to wear and tear.
Which is Best for You?
Table of Contents
Gates vs Dayco: Which one is better?
When you are choosing the best belts for your car, you must get stuck on the Gates vs Dayco debate. It is very difficult to differentiate as both of the brands provide the best product line. Yet, the brand Gates takes the greater market place over Dayco because of its performance. On the other hand, Dayco is popular for its greater mileage. Gates belt fits almost all the cars and SUVs whereas Ford’s users complain that Gates belt is too short for their vehicle. Therefore, Dayco belt provides OE standards for Toyota cars and Gates is well-known as an OE supplier for ACDelco or NAPA.
In the Gates vs Dayco review, we will give our best shot to compare these two brands, so that you can choose your best fit.
Let’s start with some of the best product lines they have produced over the years and similar on the basis of performance.
- Gates vs Dayco Timing belt kits
- Gates (Check price here)
- Dayco (Check price here)
- Gates vs Dayco Serpentine belts
- Gates (Check price here)
- Dayco (Check price here)
- Gates vs DaycoTensioners / idle pulleys
- Gates (Check price here)
- Dayco Timing Belt Kit with Water Pump (Check price here)
- Gates vs Dayco Radiator hoses
- Gates (Check price here)
- Dayco (Check price here)
Since we have highlighted their several products line, let us describe them in detail.
1. Gates vs Dayco Timing Belts
Gates Vs Dayco Timing Belts Review-In Detail
Best
Gates Timing Belt
Gates TCKWP312 Engine Timing Belt Kit with Water Pump is the best replaceable timing belt in this product line.
It just does not come with a belt, but also with full belt kits that are needed for replacement.
Features of Gates Timing Belt
Construction: For longer wear it comes with backside jackets that are constructed with Aramid reinforced nylon.
Easy Replacement: It can replace the torn belt easily that saves your money and time.
HNBR rubber: It is highly heat and oil resistant as it comes with high-grade HNBR rubber.
PTFE infused jackets: To reduce frictional losses and tooth shearing, it comes with PTFE infused jackets. You can also check in here.
Gates TCKWP312 Engine Timing Belt Kit with Water Pump
Check Price
Best Dayco WP271K1C Timing Belt
Dayco WP271K1C is one of the best timing belts in the market. It comes with a complete installation kit.
Dayco WP271K1C Engine Timing Belt Kit with Water Pump
Check Price
Dayco timing belt water pump kits are manufactured to meet the critical OE quality fit
If you click this link and make a purchase, we earn a commission at no additional cost to you.
Features-
Design: The molded cog design Dayco WP271K1C ensures a perfect fit in your car.
Installation: All the installation kits come with the timing belt package. So you don’t need to bother with carrying extra tools and wasting money.
OE quality: The Dayco WP271K1C doesn’t only meet the OE specifications, but exceeds.
ISO Certification: It is certified by ISO 9001:2008 in the USA. So you don’t have to stress out about its quality.
Warranty: The timing belt kit comes with a limited lifetime warranty.
Source: Dayco Product site
2. Gates vs Dayco Serpentine Belts
Gates K081264HD Serpentine Belt/Fan Belt
Check Price
Gates K081264HD Serpentine Belt/Fan Belt review
Gates K081264HD serpentine belt is the best serpentine belt brand for supercharger having heavy-duty construction.
This Gates serpentine belt is way quieter than other belts as it follows EPDM standard. Extra heavy-duty construction resists cracking and wear.
Gates K081264HD
Features and Description
Size: The product’s dimension is 15.9 x 5 x 1.2 which is longer than any other serpentine belts.
Technology: This is the best automotive V-belt serpentine belt that features High-standard belt technology.
Heavy-duty construction: Heavy belt loading serpentine belt that can load even 1-ton trucks.
EPDM material: This belt is constructed by EPDM materials that deliver the quietest performance.
Installation: The installation process is simpler than drinking water.
Crack-resistant: It meets the OEM specifications; therefore, it is highly crack-resistant.
- Meets or exceeds SAE J1459 specifications.
Source: https://www.
gates.com/gb/en/automotive/power-transmission/micro-v-belts-serpentine-belts.html
Dayco Belts Review
Dayco 5060915 Serpentine Belt
In the case of the Dayco serpentine belt review, we put the Dayco 5060915 Serpentine Belt as the most bought product for this product line. Dayco comes with an innovative “W” rib profile that ensures the best performance. “W” rib profile is the most innovative advancement in multi-rib belts in 25 years
Dayco 5060915 Serpentine Belt
Check Price
Dayco 5060915
Features and Description
“ELA” Stretch design: The ELA designed belt constructed for two to four point drives that can be installed without automatic or manual tensioning.
Construction: Dayco 5060915 designed with EPDM material to proceed with a quieter sound.
Deep Rib belt: Deep rib is another special feature of the Dayco 5060915.
Dayco increases the rib depth by adding extra layers of material.
Resistant ability: It is not only resistant to heat and oil, but also it is ozone degradation resistant.
“W” rib profile: “W” rib profile ensures high mileage performance.
OEM replacement: This serpentine belt has a direct OEM replacement feature.
Best timing Belt Brand
As we already have compared Gates vs Dayco timing belts, you surely have had the insight about these belts. Therefore, if you ask us for the Best timing belt brand we will definitely suggest you Gates TCKWP312 timing belt. It is an OEM specified belt that is thick enough to give you the best performance. Besides, it is the best timing belt brand for Volkswagen car models.
Well, if you ask for the best timing belt brand for Honda car models then the Dayco timing belt is our first priority.
In the Dayco timing belt kit review, we have discussed its heavy duty performance.
3. Dayco vs Gates tensioner
Gates Tensioner Review
Gates 38285 Belt Tensioner used in heavy-duty vehicles. It comes with high quality bearings and springs that secure a long life of the belt. It is trusted widely and ensure smooth performance on the go.
Gates 38285 DriveAlign Automatic Belt Drive Tensioner
Check Price
Gates 38285
Features and Description
Direct replacement: You can directly replace the Gates 38285 Belt Tensioner with the worn belt.
OEM Specification: This tensioner belt exceeds the OEM specification and thus it is trusted widely.
Squeaking elimination: It can eliminate squeaking that can fix the belt tension of the worn factory components.
Proper conjunction with serpentine belt: It perfectly syncs with serpentine belts to ensure smooth performance on the go.
Dayco Belt Tensioner Review
Dayco 89378 Belt Tensioner
The Dayco 89378 Belt Tensioner is the perfect fit in the competition against Gates belt tensioner. It provides the highest performance and longevity that keeps you and your car stress-free.
Dayco 89378 Belt Tensioner
Check Price
Dayco 89378
Features and Description
Direct replacement: Dayco 89378 has been designed compactly so that you can replace the torn one easily with no time.
Tensioner and Pulley combination: It just not comes with a tensioner but also Pulley too.
Pulley Material: The pulley comes with stainless steel that ensures durability of the product.
Spring case material: Spring case of the belt tensioner kit comes with durable cast aluminium that is absolutely cracks and fatigue-resisted.
Warranty: It has a 30-day money back guarantee and a year long warranty.
4. Gates vs Dayco hoses
Gates 22437 Lower Radiator Hose
Gates 22437 Lower Radiator Hose is an automotive radiator coolant hose. Hoses and Pipes are the part types of this Radiator. It can transfer fluid to your vehicle without creating any hassle.
Gates 22437 Premium Molded Coolant Hose
Check Price
Gates 22437 Radiator Coolant Hose Features and Description
Coolant Hose: This Gates Radiator Hose is a lower radiator coolant hose that provides world best performance.
OEM Specifications: This radiator hose meets the OEM specifications.
Fluid transfers: It can transfer fluid to your vehicle without creating any hassle.
Dayco Hoses Review
Dayco 72091 Lower Radiator Hose is designed with synthetic EPDM materials.
It can be replaced in the straight and molded radiator hoses. It is resistant to ozone as well as other harmful contaminants
Dayco 72091 Lower Radiator Hose
Check Price
Dayco 72091
Features and Description
Knitted reinforcement: This Dayco radiator hose comes with knitted reinforcement.
Construction: The Dayco 72091 Radiator hose is constructed with synthetic EPDM materials that meet the Class D-2 requirements.
Resistant ability: It is resistant to ozone as well as other harmful contaminants. Besides, it is also resistant to temperature variations.
Hose flexibility: This radiator hose’s corrugations feature offers super hose flexibility without any flattening or collapse problem.
Prevent splitting: It can prevent splitting, elongation, and ballooning.
Review table: Best 3 Gates Radiator hoses
| Products name | Summary | Pros | Cons |
| Gates 22437 Lower Radiator Hose
|
An automotive lower radiator coolant hose.
This Gates coolant hose can be molded. |
Coolant molded hose
Fitted like OEM specifications Transfer fluids Easy to install |
Hose length is short that can create difficulties when installing |
| Gates 22436 Upper Radiator Hose | An automotive upper radiator replacement upper coolant hose. | Strong hose
Easy to install Replace the entire cooling system perfectly |
The hose is short that can not fit for a 09 Avalanche or 08 Tahoe. |
| Gates 22039 Lower Radiator Hose | An automotive radiator lower coolant hose that can also be molded. | Lower coolant molded hose
Perfect fit like OEM quality |
Nothing significant found at all |
Gates vs Dayco belts: Where are they produced?
Now from curiosity, you might have wondered where the Gates and Dayco are made.
Well, Gates makes their serpentine belt and other related products in Arkansas, USA. Yet, they are planning to broaden their product line in Europe and China.
“An official statement from a year ago (here) states the resulting rollout worldwide. It will be the first in Europe, after that, Chinese offices to come.”
If you ask who makes Dayco belts and where are Dayco belts made? Then you are getting your answer here. American parts supplier Mark IV produces Dayco drive belts products. They fabricate their product mostly in China and Mexico.
An important note: Belt dressing and EPDM serpentine belts
There is an important note for you if you don’t want to ruin your new belt. As serpentine belts are EPDM material constructed, so don’t dress your belt on them. If you do so, the rubber compound will get swell that will damp your dressing.
If your dressing is damping, your belt will create noise. As the surfaces of the ribs are getting dried, nothing can stop the chirping of your belt. And your problem will begin.
If you want to minimize the chirping problem of your belt, you have to change your belt. Otherwise, you have to tolerate the noise, and that will cause a problem for you.
Dayco themselves warn of this on their official site
What is a serpentine belt?
A serpentine belt is a single as well as a continuous belt that is used in an automotive engine. An idler pulley or a belt tensioner guides the belt.
Gates vs Dayco timing belts: Gates’ timing belt kits are popular for its thicker construction and longer performance. It is highly resistant to harmful contaminants such as oil, chemicals, etc.
Dayco vs Gates tensioner: Both the Dayco and Gates tensioner are perfect for your vehicle. But, the Dayco tensioners are a little bit more expensive than the Gates.
Yet, there are a bunch of plastic parts in the Gates tensioner.
Gates vs Dayco hoses: Gates achieved its popularity over Dayco in terms of Radiator coolant hose. To know the accuracy of Gates hoses, you have to learn the Gates hose cross reference guide. Some customers complain about Dayco that their belt is too short of installing.
Gates belts: Gates offer their automotive V-belts for all of the American vehicles. The Gates belts are resistant to heat and harmful contaminants. Besides, it exceeds the OEM quality.
Gates tensioner review: The gates belt tensioner provided the best performance in your power transmission system. It performs even better than the factory one.
Dayco belts: Dayco belts are famous because of their automotive power transmission and the cooling system components. They offer the super flexible V-belt that will increase the airflow around the belt.
Gates belts review: The Gates offers good quality and heavy-duty belt.
They are heat and crack resistant. If you look over Gates vs OEM belts, you will find that they have thicker construction than the OEM belts.
Related
- What are the Best Shocks For Dodge RAM 1500 4×4? Click to know more about best shocks for towing ram 1500 andheavy duty shocks for dodge ram 1500 with dodge ram 1500 shocks reviews.
- Are Bilstein shocks better than Rancho? Are Bilstein shocks the best? Are Rancho shocks any good? Read to know Rancho vs Bilstein
- Which is better Fox or Bilstein? Are Fox 2.0 shocks worth the money? Are Bilstein 5100 worth it? Are Fox shocks the best? Discover more here Bilstein 5100 vs Fox 2.0
- Is Moog better than AC Delco? Is Moog a good brand? Are ACDelco advantage Parts any good? Are Moog ball joints worth the money? A piece of advice for MOOG vs ACDelco
FAQ
Which belt is better: Dayco or Gates?
Both Gates and Dayco belts are good quality.
As mentioned before, Gates is the most famous brand that can perform better than the Dayco belt. Most of the American vehicles choose the Gates belt over the Dayco. Yet, you can’t deny Dayco for its longevity.
Which brand of the serpentine belt is best?
In the Dayco vs Gates serpentine belts debate, the Dayco wins literally. Gates provide the highest quality serpentine belts in this product line.
Are Dayco Belts good quality?
Yes, Dayco belts are good quality belts. Dayco provides their OEM specification belts and hoses.
How long should a serpentine belt last?
Serpentine belt usually lasts for a long time. EPDM constructed belts last approximately 100,000 miles and old fashioned belts last no longer than half of it.
What makes serpentine belts break?
If your belt is in poor condition, your serpentine belt will break. Another reason that will break your belt is a failed bearing.
Are Dayco serpentine belts any good?
Dayco serpentine belts are good enough to run for gears.
EPDM constructed material helps you to ride completely quiet.
What is the best serpentine belt to buy?
All of the Gates serpentine belts are good but the Gates K081264HD is the best. It is the most sold serpentine belt on Amazon.
What is the quietest serpentine belt?
If you want the quietest serpentine belt, you can go for Dayco 5060915 Serpentine Belt. It has six ribs that will provide you a safe and quiet ride.
Conclusion
Gates are the most famous brand as it provides the best quality serpentine belt, timing belt kits, and radiator coolant hose. Their performance is excellent because of its thicker development and extraordinary dependability. Yet, you can’t disparage Dayco as it also provides their quietest serpentine belt.
Both of the brands are perfect for your vehicles. So, you can’t just ignore one brand over the other.
After reading the Gates vs Dayco review, what will you prefer for your vehicle? Let us know what suits the best for your vehicle.
And if you have any questions in your mind or want to know more, don’t hesitate to comment.
Which timing belt is better to choose
Popular brands of timing belts
The day comes, and every Russian car owner asks the question “what timing belt to buy?”, Because the market is replete with goods of foreign and domestic production.
When choosing a belt, they are guided by its type (toothed or wedge-shaped) and geometry (width, length or center interval).
Width is given in mm or inches, center distance is given in mm and inner belt length is mainly in inches.
Usually the choice of timing belt rests on the name of the manufacturer.
The most solid specimens are produced:
Gates,
Bosch
,
Dayco,
Contitech.
The last brand is the most common.
This Belgian concern makes belts for drive gears of special equipment, internal combustion engines and is their main supplier to the assembly shops of the global automotive industry.
German Contitech and Bosch, in addition to the main range, produce drive units, air suspension parts, and other auto components.
Italian Dayco specializes in the production of drive belts and roller bearings.
How to choose a timing belt?
It is better to buy belts from an authorized dealer. In his catalogs, they go under the brand of the automobile plant, and not the RTI plant, but they are original.
For example, for Cadillac products are presented with the General Motors brand under their own catalog code, although in fact their place of origin is Gates Corporation.
This belt is 20-30% more expensive than a belt directly from Gates. However, in the Russian Federation, authentic products of this kind with the designation of a real manufacturer are not for sale.
That is why the car is equipped with a Gates-marked part before entering the series, and the analogue replaced during the warranty service is cataloged as a GM product.
In this regard, there is an opinion among car enthusiasts that samples of the highest class are supplied for assembly, and mediocre quality is not exported.
Why overpay?
This circumstance allows you to use a more accessible version of the selection. If the car was equipped from the very beginning with, say, a thing from Contitech or Gates, or it is known for sure which brands the manufacturer uses, there is no need to buy the original at the dealership.
It is enough to change it for the same wear-resistant analogue of a legal supplier company. It has long been proven by experience that such products serve no less time than the original.
Products of the listed brands are considered to be tested, coping well with their technological functions, successfully working out the prescribed.
You can, of course, take a chance and not listen too much to the opinion of experts, immediately stopping at a suitable (in your opinion) option, but in the future, only blame yourself.
About fake timing belts
There are quite a few fakes in free retail trade (although fakes are rare among the «officials», but still, by some miracle, they penetrate there too). Sometimes traders (especially small merchants of the Lipetsk car market or debutant distributors) can be mistaken on this score and sincerely assure that they are offering the original, besides advertising it.
Take the same Gates, which for some time now has been producing a reinforced belt with an extended service life. The annotation for this product says: it is allowed to operate it 3 times longer than competitors’ products. The promotional brochure mentions that Gates uses nitrile (HNBR and HSN) instead of neoprene (CR, chloroprene), which is the base material for the range of rubber products.
Don’t be fooled!
As you know, it is quite hot under the hood, and at the same time, the nitrile drive train remains in optimal condition and does not crack from temperature contrast (heating and freezing in the cold season).
In addition, these products are not sensitive to the effects of fuels and lubricants, as well as technical chemical solutions.
Thanks to such super properties, the manufacturer promises extended warranty conditions that reliably ensure the prescribed service life (if the belt is correctly installed and adjusted).
But all the insidiousness of a fake, visually similar to the original, lies in the fact that it is cast not from expensive nitrile, but from the same neoprene, and sometimes even substandard.
In the meantime, the client believes that he has acquired a branded counterpart, as a result of which the prestige and business reputation of the counterfeit brand suffer, and there are problems with the image.
From selection to replacement
Sometimes «belt with rollers» repair kits are sold, which we recommend to purchase, because it will cost less than each element separately.
Practice shows that the resource of the rollers is often not enough for one more belt life, so it is better to change both at the same time. The belt must be mounted exclusively on a cold engine using special tools.
Please note that in 70 cases out of 100, an inept performer of the operation is to blame for the imminent cliff. According to the hardness of the belt according to Shore, the mentioned parameter should correspond to 63-67 units, and the larger it is, the more the belt “dupes” in the cold (and winters in Lipetsk are cold).
In general, it is better not to save on components, because the deterioration of a handicraft or product of dubious origin in many cases turns into a repair of the power plant.
Timing belts: which is better to choose?
So, the question «which timing belt is better?» largely trivial. As a basis, you can take the message that the most acceptable way out is to equip with an original product or a reliable copy.
With the latter option, you should additionally ask and check whether the spare part is branded.
It is characteristic that the appearance of the belt, packaging in such cases may not cause concern (sufficient level of printing, application of a serial code, the presence of holograms).
As you can see, there is no unambiguous algorithm for determining the most suitable belt.
If we turn to statistics, then in terms of the number of sales in the former republics of the USSR, the rating is as follows:
Gates.
Contitech.
Dayco.
Bosch.
If even after that you are tormented by the question of which timing belt to put on, then it makes sense to seek advice from the portal avtoritet48.ru, whose administration is based in Lipetsk.
To select, you can go to the catalog of timing belt kits or immediately select model
- Audi
- BMW
- Citroen
- Daewoo
- Ford
- Honda
- Hyundai
- KIA
- Mazda
- Mitsubishi
- Nissan
- All models here
Chevrolet
Which timing belt is better — Autoworld
Which timing belt is better?
If you found this article, you are definitely on the right track. As great minds have said, asking the right question is half the answer, or something like that. Whatever car or engine you have, the abundance of timing belts on the market is crazy and there are a lot of alternatives, but do they all have the same technical characteristics and are safely interchangeable? — No, and very much not.
Let’s start from the leaders of the drive belt world and go down to the bottom.
The main manufacturers and suppliers of timing belts, generator, power steering, air conditioning compressor drive, water pump for car conveyors are … Continental, Dayco, Gates. This is the cream of society, but there are other decent guys, namely Bosch and Ina.
The first three are wonderful, their belts run the declared resource and even more, of course, subject to tension, no contact with oil or antifreeze and all that stuff (well, you understand). But there is one caveat — fakes, counterfeit or «Chinese» (historically, our people do not like low-quality «Chinese»).
All three are mercilessly forged, and if you think that it is very difficult to buy a fake, then … you are a romantic. No, there are a lot of fakes and every year they get better and better in appearance, thus it becomes simply impossible for an inexperienced person to distinguish a fake.
5 years ago we filmed the first video reviews of spare parts, including timing belts.
The fakes were terrible — crooked inscriptions, disgusting workmanship, a lot of jambs in general. Watch any of the latest videos of 2020 — a whole new level. I recommend that you familiarize yourself with our work:
Top belts have always been counterfeited and will continue to be counterfeited because they are the best. Yes, this is already clear to everyone, and what happens? Install a belt from another manufacturer, it is probably not forged.
Of course they don’t fake it, but the belt itself can be rubbish. I do not want to study the structure of carbon atoms, what is contained in the rubber of timing belts, what is its content, how the threads of the court are braided and all this nonsense.
I repeat, if you buy a timing belt, then only the best brands, yes, there is a chance of a fake, but it’s better than buying a pig in a poke.
We went down to the bottom, let me list low-quality, little-known, dubious, and most importantly problematic belts. Problematic ones are those that are torn, stretched and go much less than the stated period. This list is many times larger than that trio:
AT — allegedly a Czech manufacturer, an ordinary low-quality China in a beautiful package;
LSA — the same as AT, only «Slovakia» will be written on the package. Well, yes, they showed creativity.
Zollex — oh God… it’s hard to say what’s normal about this brand
Aurora — cheap Chinese, the inscription «made in Poland».
I am not against these inscriptions, but this is done in order to get into trust, ala European product. In fact, even some of the TOP 3 belts are made in China and they run great. But definitely not Aurora, Zolex and further down the list.
Hort, SKL, Finwhale, Trialli …. when will these «producers» end?!
Ina and Bosch timing belts are pretty good, especially Ina. Quite often, instead of the original belt or Gastes-Conti, people put Inu and everything works fine. Ina is a manufacturer of excellent bearings, and, accordingly, timing rollers. With Bosch belts, the situation is slippery — Bosch simply does not make some belts, but simply repackages Conti, Gates, Daiko, etc. In a sense, a good lottery.
As for belts for VAZ cars, and not only VAZ, you can add Lanos, Aveo, Nexia, Renault Logans, etc. a good Russian manufacturer of rubber products — BRT, but … sometimes their price is not quite adequate and competitive. And today, Gates and Continental belts are cheaper.