AMD Radeon RX 590 GME features Polaris 20 XTX
At the Financial Analyst Day, AMD executives were proud of the fact that their production has now shifted to 7nm for both Ryzen and Radeon. However, it appears that not only 12nm but also 14nm products are still being released, with Radeon RX 590 GME being one of such ‘zombie rebrands’.
The Radeon RX 590 GME is an exclusive model for the Chinese market. Only four cards have been revealed by the board partners and can be found through Asian e-tailers. At Expreview you will find the very first review of the RX 590 GME from XFX. This model is actually the fastest GME model out of the four (with a boost clock of 1460 MHz).
There are no official clock speeds for the RX 590 GME, but the slowest model is PowerColor’s Red Dragon with a 1380 MHz boost (the non-GME model features 1555 MHz clock). This a significant decrease in the frequency and it appears to be associated with the GPU.
The Radeon RX 590 GME features Polaris 20 XTX GPU, not Polaris 30 as the original RX 590. This is without a doubt a continuation of misleading product naming by AMD and this is likely why we won’t see this model on different markets. AMD’s Polaris 20 is a 14nm processor, while Polaris 30 is 12nm. The latter offers more headroom for higher clocks and there is no logical reason to call the new model an RX 590. Yet, here we are.
In fact, the RX 590 GME is around 5% slower than non-GME. In terms of overclocking, the reviewer at Expreview basically gave up, because even an 80 MHz uplift resulted in issues. In other words, the RX 590 GME is basically a rebranded and overlocked RX 580.
The conclusion of the review is straightforward: Radeon RX 5500 XT is a much better product, although it costs 1399 Yuans, while the RX 590 GME retails at 1199. Not to mention, the Navi 14-based model offers more OC headroom and consumes less power.
| RX 590 | RX 590 GME | |
|---|---|---|
| ASROCK Phantom Gaming | 1591 MHz | 1413 MHz |
| XFX Black Wolf/Fatboy | 1600 MHz | 1460 MHz |
| POWERCOLOR Red Dragon | 1555 MHz | 1380 MHz |
| SAPPHIRE NITRO+ Special Edition | 1560 MHz | 1440 MHz |
| AMD Radeon RX (Polaris 10/20/30) | |||
|---|---|---|---|
| SKU | GPU | Cores | Boost Clock |
| RX 590 | 12nm Polaris 30 XT(X) | ||
| RX 590 GME | 14nm Polaris 20 XTX | ||
| RX 580 | 14nm Polaris 20 XT(X/R) | ||
| RX 580G | 14nm Polaris 20 | ||
| RX 580 OEM | 14nm Polaris 20 | ||
| RX 580 2048SP | 14nm Polaris 20 | ||
| RX 480 | 14nm Polaris 10 XT | ||
Source: Expreview
Polaris 20: USA Vs Brazil Results
BJJ Culture BJJ News UK BJJ News
Lucy Wynne
British grappling promotion Polaris have been hosting the creme de la creme of events lately in the grappling world, especially when it comes to pitting different talents from across the globe against one another.
Polaris Squads 3 in August 2021 saw Team USA Vs Team UK and Ireland, where Team USA defeated Team UK/Ireland 7-0, although Team USA didn’t quite manage to keep that momentum this time around.
Set in Newport, Wales on 26 June 2022 we saw two incredible teams go head to head in a battle of back and forth grappling exchanges with the top contenders of the sport displaying their talents in the fourth edition of Polaris Squads. Not only that, but arguably one of the most exciting superfight match ups of all time took place between UFC veterans Demian Maia and Benson Henderson. Maia was declared the winner by unanimous decision.
The two teams of eight fought for over two hours, and with the five minute sub only rules we saw a lot of (expected) draws take place due to the incredible high levels of the grapplers competing in the tournament, but fear not some submissions did take place. Mason Fowler paved the way for the USA and managed to get the first point for his team by finishing Kywan Gracie via arm bar, but Mica Galvao rescued Team Brazil by submitting Keith Krikorian via arm bar before winning the event for them by finishing him once again (but with a triangle this time).
Round 1 Results:
Luiz Paulo vs. Nathan Orchard – draw
Igor Tanabe vs. Hunter Colvin – draw
Marcelo Fausto vs. Geo Martinez – draw
Isaque Bahiense vs. Richie Martinez – draw
Mason Fowler def. Kywan Gracie via armbar
Mica Galvao vs. Keith Krikorian – draw
Diogo Reis vs. Nick Ronan – draw
Mason Fowler vs. Fabricio Andrey – draw
Jon Blank vs. Isaque Bahiense – draw
Mica Galvao vs. Geo Martinez – draw
Luiz Paulo vs. Nathan Orchard – draw
Igor Tanabe vs. Nick Ronan – draw
Keith Krikorian vs. Fabricio Andrey – draw
Round 2 Results:
Richie Martinez vs. Kywan Gracie – draw
Luiz Paulo vs. Jon Blank – draw
Diogo Reis vs. Nathan Orchard – draw
Hunter Colvin vs. Marcelo Fausto – draw
Mica Galvao def. Keith Krikorian via armbar
Mason Fowler vs. Igor Tanabe – draw
Mica Galvao vs. Nick Ronan – draw
Fabricio Andrey vs. Geo Martinez – draw
Isaque Bahiense vs. Hunter Colvin – draw
Luiz Paulo vs.
Jon Blank – draw
Marcelo Fausto vs. Nick Ronan – draw
Mica Galvao def. Keith Krikorian via triangle
Mica Galvao vs. Mason Fowler – draw
Catch up on the full event here on UFC Fight Pass
Team Brazil finishes the event 2-1 up and defeats Team USA to win Polaris 20!
- ← UFC Vegas 57: Rodolfo Vieira says he’s a ‘blue belt’ in MMA
- UFC 276: Donald ‘Cowboy’ Cerrone Announces Retirement After 55 Fights →
Lucy Wynne
BJJ Blue Belt from Southampton, England. I’m an avid writer, music lover and Brazilian Jiu-Jitsu (BJJ) enthusiast. I began training BJJ when I was at university, and I’ve trained ever since. #OSS
Lucy Wynne has 150 posts and counting.
See all posts by Lucy Wynne
|
3DNews Technologies and IT market. Video card news Polaris 20 XTX and Polaris 20 XL cores replace. The most interesting in the reviews
04/10/2017 [14:12], Ivan Grudtsyn VideoCardz journalists managed to get hold of a not yet officially released version of the Radeon Software Crimson Edition graphics driver, which optimizes the performance of the debut AMD Radeon RX 500 family graphics cards. date. Analysis of the contents of the «future» Radeon Crimson allowed foreign colleagues to identify the code names of the graphics cores of the Radeon RX 580, RX 570 and RX 550 adapters.0007 So, we can state that the AMD Radeon RX 580 model received the Polaris 20 XTX graphics processor. Sure, it’s related to the Polaris 10 GPU (with all 36 CUs), but is it just a copy of the latter? We will receive an answer very soon. By and large, Advanced Micro Devices had the opportunity to transfer Polaris 10 to a new stepping and at least partially solve the problem of its modest overclocking potential, but all this is associated with additional costs . Map of the new 9 series0007 The core of the Radeon RX 570 graphics card is identified in the table above as Polaris 20 XL. The RX 470 successor can also get a Polaris 10 chip on the new stepping, but the number of stream processors (2048 units), texture units (128 units) and render units (32 units) will not change from this, since both the RX 570 and the RX 470 has only 32 CUs out of 36 possible. Note that the older models of the Radeon RX 500 family will be offered with 4 and 8 GB of GDDR5 memory.
Polaris 10 graphics core The Radeon RX 550 is based on the Lexa Pro chip. The Pro prefix in AMD’s nomenclature usually means a stripped-down GPU, and an exception for the RX 550 is unlikely to be made. The name “Lexa” itself, unlike Polaris (“pole star”) and many others, is still difficult to identify with any place on the map of the Earth or the starry sky, so AMD cannot do without clarification in this case. Card of the new series It is quite remarkable that the Radeon RX 560, a model based on the Polaris 11 chip, is missing from the table. Source:
If you notice an error, select it with the mouse and press CTRL+ENTER. Related Content Permanent URL: https://3dnews.ru/950428 Headings: Tags: ← |
..
.. 
Apparently, AMD saved it for the second wave of announcements. The same goes for the Radeon RX Vega (Vega 10), but the flagship’s delay was predictable. The upcoming heavyweight will have 409 in its arsenal6 stream processors and 8 GB HBM2 buffer memory. Its performance promises to be much higher than that of the Radeon RX 580/480. At the same time, the ability of RX Vega to withstand high-end video cards of the NVIDIA Pascal family will largely depend on its frequency potential. 578 Polaris Universal Adhesive, 20 kg
Frost-resistant adhesive for gluing vinyl or textile coverings.
After defrosting, it restores its adhesive characteristics. Strictly follow the rules of defrosting.
For laying floor coverings on wet adhesive, on absorbent substrates.
Solvent free per TRGS 610. GISCODE D1
Properties:
• high initial tack
• high final tack
• easy to apply
• solvent-free according to TRGS 610
• frost-resistant, restores adhesive characteristics after thawing
For bonding:
• foamed vinyl coverings
• foam-backed, polyester and natural fiber vinyl coverings
coverings in rolls and tiles
• carpets based on PVC, latex and polyurethane
• astbovinyl boards
Specifications:
Base: acrylic dispersion
Colour: beige
Consistency: medium viscosity
Density: approx. 1.29 g/cm3
Thinner/Cleaner: water
Application method: notched trowel (e.g. TKB/F 21/B1)
Consumption: approx. 250 – 450 g/m2, depending on coating, substrate and notched trowel size
Drying time: approx.
10-20 minutes*
Styling time: approx. 30 minutes*
Hardening time: approx. 48 hours*
Shelf life: within 12 months 9D 1
Safety data sheet: on request
* The above data are laboratory measurements that are considered as normative due to the versatility of on-site application methods.
Substrate:
The ground surface ready for coating must meet the requirements of VOB/DIN 18365, 18202, i.e. must be strong in compression and tension, clean, permanently dry, without cracks. Insufficiently suitable floors must be improved: apply a primer and putty
Application method:
Stir thoroughly before use! Apply adhesive to the entire surface with a notched trowel TKV/A2/B1. Choose the spatula according to the coating substrate and the substrate. When laying vapor-proof coatings, it is recommended to dry the adhesive until an adhesive film is formed. This time depends on the evenness of the surface, the applied adhesive layer, the room temperature and the relative humidity of the air.
If Polaris adhesive freezes, be aware of the slow thawing process. This process can take several hours, (depending on the temperature up to several days), it is recommended to apply the adhesive only when it can be easily stirred. after which you should thoroughly mix the glue in the jar. If the viscosity is high, i.e. the glue does not mix well, it should be further kept at a temperature of 15-18 ° C for several hours, then another? mix once. Coatings should be rubbed well immediately after laying, especially in the area of seams. Follow the recommendations of the coating manufacturers!
Special attention:
When carrying out work, the relevant standards and regulations must be observed. Outside of Germany, the relevant national regulations apply, which the consumer must be aware of.
Packaging:
3 kg, 6 kg, 12 kg, 20 kg net
Note:
Our data are based on laboratory and practical experience.