Vento ta-f: Engadget is part of the Yahoo family of brands

Checkout

ventodelsud. zip (7)

4.34MB

• Installation of seam joints
• Installation of eco joint joints
• Installation of seamless joints
• ABOUT MATERIAL
• Textures
• How to order
• Delivery
• Return policy

Joint assembly

1.1. Wallpaper should be stored horizontally before installation. Wallpaper free from stretch film (If stored for more than one month).

2. CHECKING THE FACTURA WALLPAPER

2.1. FACTURA wallpaper must be checked before installation (model, size, color).

2.2. Manufacturing defects are printing defects, image inconsistencies on adjacent strips of more than 3 mm, inconsistencies in individual strips in color, color mismatch on the FACTURA wallpaper and on the color proof. Marriage is not a color mismatch on the FACTURA wallpaper and on the computer monitor.

3. PREPARATION OF THE WALLPAPER FACTURA

3.1. Lay out the wallpaper on a clean surface according to its pattern. If the wallpaper consists of several canvases, join them and make sure that the pattern matches perfectly. Using a tape measure, carefully check the correspondence between the dimensions of the wallpaper and the surface to be glued.

3.2. Wallpaper label FACTURA

21 4. WALL PREPARATION

4.1. Prepare walls before wallpapering. Remove old wallpaper, dirt and stains from the walls. If the walls have been painted, all paint must be removed from the walls.

4.2 . If there are cracks and irregularities on the walls, they must be repaired.

4.3. The surface to be bonded (including drywall sheets) must be leveled, puttied and treated with a deep penetration acrylic primer. If the primer contains no antiseptic, additionally treat with antiseptic

4. 5. Various wall defects that are not removed during their preparation will be visible after wallpapering and may affect the quality of the pasting (so-called “bubbles” may appear on the wallpaper sheets, the joints of the wallpaper sheets will diverge, the wallpaper sheets will peel off, etc.)

4.6. The surface to be glued must be dry, even, hard, slightly rough, strong, slightly absorbent, neutral (no alkalis present), free of dust, grease, cracks, unevenness, dirt, stains, traces of paint.

4.7. Do not wallpaper on walls that are not completely dry. Otherwise, undesirable color changes and flaking of the wallpaper may occur.

4.8. The humidity of the room in which the wallpaper is pasted should be about 40%. Carry out wallpapering at room temperature 18–25°C.

4.9. The surface of the walls must be evenly light.

5. WALLPAPER INSTALLATION / ADHESIVE

5. 1. Only use FACTURA EXTRA 5 (KLEO) adhesive or SEMIN adhesive appropriate for the wallpaper type.

5.2. Apply according to manufacturer’s instructions.

5.3. Select the canvas to be pasted first. Apply the adhesive evenly to the wall using a roller and brush. Apply glue on the wall to the size of the prepared canvas with a margin of 20 cm to the right. Start gluing. If necessary, brush the edges of the wallpaper with glue and roll the joint with a special roller. Wallpapers are glued butt to butt.

6. RECOMMENDATIONS

6.1. When sticking, do not let the glue get on the surface of the wallpaper, the glue leaves stains, and their complete removal is not guaranteed.

6.2. Adhesive stains can be removed with a damp cloth. Do not rub the glue on the canvas, it must be literally “washed off”, and not erased from the surface.

6. 3. Any protruding adhesive must be removed immediately before it dries, otherwise the adhesive may react with the ink layer, resulting in adverse effects.

6.4. During wallpapering and drying, avoid drafts in the room and temperature fluctuations.

6.5. Do not ventilate or heat the pasted room, do not make other repairs until the wallpaper is dry (at least 24 hours, and preferably 48 hours).

6.6. Never use ink pencils, felt-tip pens, markers or ballpoint pens to mark flooring.

6.7. When sticking, do not rub the surface of the wallpaper too hard and for a long time, do not scratch the wallpaper.

6.8. Wallpaper drying time 1-3 days. During drying, do not open the windows in the room where the wallpaper was pasted and allow drafts to occur. If air bubbles remain on the wallpaper, they can be removed with wallpaper glue and a medical syringe with a thick needle. Fill the syringe with wallpaper glue, put on a needle, gently pierce the bubble and squeeze a small amount of glue into the bubble. Smooth out the bubble with a wallpaper spatula, squeezing out excess glue through the hole created by the needle.

7. LIMITATION OF LIABILITY

7.1. The manufacturer is not responsible for damage to the FACTURA wallpaper due to improper storage, improper installation (gluing) and fixing of the FACTURA wallpaper, improper operation, as well as due to intentional or negligent damage to the wallpaper by third parties.

7.2. The manufacturer is not responsible for the possible discrepancy between the dimensions specified by the Customer and the actual dimensions of the surfaces on which it is planned to install the photo wallpaper and related inconsistencies in the image.

7.3. The manufacturer of the FACTURA wallpaper is not responsible for the total or partial peeling off of the FACTURA wallpaper due to improper surface preparation.

7.4. Claims for color discrepancy, color defects, size discrepancy, poor image quality after applying glue to at least one part of the FACTURA wallpaper or after gluing all or part of the FACTURA wallpaper are not accepted.

Installation of joint eco

Download instructions

1. STORING THE WALLPAPER FACTURA

1.1. Wallpaper should be stored horizontally before installation. Wallpaper free from stretch film (If stored for more than one month).

2. CHECKING THE FACTURA WALLPAPER

2.1. FACTURA wallpaper must be checked before installation (model, size, color).

2.2. Manufacturing defects are printing defects, image inconsistencies on adjacent strips of more than 3 mm, inconsistencies in individual strips in color, color mismatch on the FACTURA wallpaper and on the color proof. Marriage is not a color mismatch on the FACTURA wallpaper and on the computer monitor.

3. PREPARATION OF THE WALLPAPER FACTURA

3.1. Lay out the wallpaper on a clean surface. Using a tape measure, carefully check the correspondence between the dimensions of the wallpaper and the surface to be glued.

3.2. Wallpaper label FACTURA

21 4. WALL PREPARATION

4.1. Prepare walls before wallpapering. Remove old wallpaper, dirt and stains from the walls. If the walls have been painted, all paint must be removed from the walls.

4.2 . If there are cracks and irregularities on the walls, they must be repaired.

4.3. The surface to be bonded (including drywall sheets) must be leveled, puttied and treated with a deep penetration acrylic primer. If the primer contains no antiseptic, additionally treat with antiseptic

4. 5. Various wall defects that are not removed during their preparation will be visible after wallpapering and may affect the quality of pasting (so-called “bubbles” may appear on the wallpaper canvases, gaps in the joints of the wallpaper canvases, peeling off the wallpaper canvases, etc.).

4.6. The surface to be glued must be dry, even, hard, slightly rough, strong, slightly absorbent, neutral (no alkalis present), free of dust, grease, cracks, unevenness, dirt, stains, traces of paint.

4.7. Do not wallpaper on walls that are not completely dry.

4.8. The humidity of the room in which the wallpaper is pasted should be about 40%. Carry out wallpapering at room temperature 18–25°C.

4.9. The surface of the walls must be evenly light.

5. WALLPAPER INSTALLATION / ADHESIVE

5.1. Only use FACTURA EXTRA 5 (KLEO) adhesive or SEMIN adhesive appropriate for the wallpaper type.

5.2. Apply according to manufacturer’s instructions.

5.3. Select the canvas to be pasted first. Apply the adhesive evenly to the wall using a roller and brush. Apply glue on the wall to the size of the prepared canvas with a margin of 20 cm to the right. Start gluing. If necessary, brush the edges of the wallpaper with glue and roll the joint with a special roller. Wallpapers are glued butt to butt.

6. RECOMMENDATIONS

6.1. When sticking, do not let the glue get on the surface of the wallpaper, the glue leaves stains, and their complete removal is not guaranteed.

6.2. Adhesive stains can be removed with a damp cloth. Do not rub the glue on the canvas, it must be literally “washed off”, and not erased from the surface.

6.3. Any protruding adhesive must be removed immediately before it dries, otherwise the adhesive may react with the ink layer, resulting in adverse effects.

6.4. During wallpapering and drying, avoid drafts in the room and temperature fluctuations.

6.5. Do not ventilate or heat the pasted room, do not make other repairs until the wallpaper is dry (at least 24 hours, and preferably 48 hours).

6.6. Never use ink pencils, felt-tip pens, markers or ballpoint pens to mark flooring.

6.7. When sticking, do not rub the surface of the wallpaper too hard and for a long time, do not scratch the wallpaper.

6.8. Wallpaper drying time 1-3 days. During drying, do not open the windows in the room where the wallpaper was glued and allow drafts to occur.

7. LIMITATION OF LIABILITY

7.1. The manufacturer is not responsible for damage to the FACTURA wallpaper due to improper storage, improper installation (gluing) and fixing of the FACTURA wallpaper, improper operation, as well as due to intentional or negligent damage to the wallpaper by third parties.

7.2. The manufacturer is not responsible for the possible discrepancy between the dimensions specified by the Customer and the actual dimensions of the surfaces on which it is planned to install the photo wallpaper and related inconsistencies in the image.

7.3. The manufacturer of the FACTURA wallpaper is not responsible for the total or partial peeling off of the FACTURA wallpaper due to improper surface preparation.

7.4. Claims for color discrepancy, color defects, size discrepancy, poor image quality after applying glue to at least one part of the FACTURA wallpaper or after gluing all or part of the FACTURA wallpaper are not accepted.

Mounting seamless

1.1. Wallpaper should be stored in a horizontal position until installation. Wallpaper free from stretch film (If stored for more than one month).

2. CHECKING THE FACTURA WALLPAPER

2. 1. FACTURA wallpaper must be checked before installation (model, size, color).
2.2. Manufacturing defects are printing defects, color discrepancy on the FACTURA wallpaper and on the color proof. Marriage is not a color mismatch on the FACTURA wallpaper and on the computer monitor.

3. PREPARATION OF THE WALLPAPER FACTURA

3.1. Lay out the wallpaper on a clean surface. Using a tape measure, carefully check the correspondence between the dimensions of the wallpaper and the surface to be glued.

3.2. Wallpaper marking FACTURA

0003

4. WALL PREPARATION

4.1. Prepare walls before wallpapering. Remove old wallpaper, dirt and stains from the walls. If the walls have been painted, all paint must be removed from the walls.

4.2 . If there are cracks and irregularities on the walls, they must be repaired.

4.3. The surface to be bonded (including drywall sheets) must be leveled, puttied and treated with a deep penetration acrylic primer. If there is no antiseptic in the primer, additionally treat with antiseptic

4.4. Various wall defects that are not removed during their preparation will be visible after wallpapering and may affect the quality of pasting (so-called «bubbles» may occur)

4.5. The surface to be glued must be dry, even, hard, slightly rough, strong, slightly absorbent, neutral (no alkalis present), free of dust, grease, cracks, unevenness, dirt, stains, traces of paint.

4.7. Do not wallpaper on walls that are not completely dry.

4.8. The humidity of the room in which the wallpaper is pasted should be about 40%. Carry out wallpapering at room temperature 18–25°C.

4.9. Wall surfaces must be uniformly white.

5. WALLPAPER INSTALLATION / ADHESIVE

5.1. Only use FACTURA EXTRA 5 (KLEO) adhesive or SEMIN adhesive appropriate for the wallpaper type.

5.2. Mix and apply adhesive according to manufacturer’s instructions. Apply the adhesive evenly to the wall using a roller and brush.

6. RECOMMENDATIONS

6.1. When sticking, do not let the glue get on the surface of the wallpaper, the glue leaves stains, and their complete removal is not guaranteed.

6.2. Adhesive stains can be removed with a damp cloth. Do not rub the glue on the canvas, it must be literally “washed off”, and not erased from the surface.

6.3. During wallpapering and drying, avoid drafts in the room and temperature fluctuations.

6.4. Do not ventilate or heat the pasted room, do not make other repairs until the wallpaper is dry (at least 24 hours, preferably 48 hours).

6.5. Never use ink pencils, felt-tip pens, markers or ballpoint pens to mark flooring.

6.6. When sticking, do not rub the surface of the wallpaper too hard and for a long time, do not scratch the wallpaper.

6.7. Wallpaper drying time 1-3 days. During drying, do not open the windows in the room where the wallpaper was glued and allow drafts to occur.

7. LIMITATION OF LIABILITY

7.1. The manufacturer is not responsible for damage to the FACTURA wallpaper due to improper storage, improper installation (gluing) and fixing of the FACTURA wallpaper, improper operation, as well as due to intentional or negligent damage to the wallpaper by third parties.

7.2. The manufacturer is not responsible for the possible discrepancy between the dimensions specified by the Customer and the actual dimensions of the surfaces on which it is planned to install the photo wallpaper and related inconsistencies in the image.

7.3. The manufacturer of the FACTURA wallpaper is not responsible for the total or partial peeling off of the FACTURA wallpaper due to improper surface preparation.

7.4. Claims for color discrepancy, color defects, size discrepancy, poor image quality are accepted only before wallpaper installation.

ABOUT THE MATERIAL OF THE WALLPAPER FACTURA

Invoices

Premium interlining sand

Premium interlining plaster

Premium non-woven canvas

Eco interlining

Premium textile

Eco textile

skin

How to order

1. To order FACTURA wallpaper, you must submit an application on the website under the selected model.

2. You will receive a wall layout for approval by mail. The layout is a reduced view of the wall, where the image is adjusted to certain dimensions.

3. After agreeing on the layout, we issue an invoice. FACTURA wallpapers are ordered after 100% prepayment with a bank card. To select payment for goods using a bank card on the corresponding page, you must click the button «Payment for an order with a bank card». Payment is made through PJSC SBERBANK using Bank cards of the following payment systems:

4. After paying the bill, wallpaper production starts. Making an order 2-4 days.

5. Finished wallpapers are delivered by a transport company to the address of the recipient, or they are waiting for the customer in our showroom at ARTPLAY in case of pickup.

Delivery

We carry out delivery across all Russia and the CIS countries. Shipping cost depends on the selected region and is calculated individually. Delivery time — from 2 to 6 days depending on the selected region.

FACTURA wallpapers are securely packaged in sturdy cardboard tubes. The tubes are closed with metal lids and fixed with branded tape. In the tube, along with the wallpaper wrapped with a protective film, there will be your documents (KP, payment agreement, information on use).

Pickup — St. Petersburg, Sverdlovskaya embankment, 4 letters A
Mon-Sun from 10:00 to 22:00

Moscow (1-2 walls) 850 rub. 2-3 days

St. Petersburg (1-2 walls) 600 rub. 1-2 days

Throughout Russia (1-2 walls) 950 rub. Except St. Petersburg and Moscow

More than 2 walls (delivery calculated individually)

Seamless fabric (delivery calculated individually)

Return policy

FACTURA wallpapers are made to order.

Refunds for wallpaper «FACTURA» is possible in case of detection of a manufacturing defect within 10 days after receipt of the goods.

Printing defects, misalignment of the image on adjacent strips of more than 3 mm, mismatch of individual stripes in color, color mismatch on the FACTURA wallpaper and on the color proof are considered manufacturing defects. A manufacturing defect is not a color mismatch on the FACTURA wallpaper and on a computer monitor.