Windows 10 blue screen system service exception: [FIXED] BSOD System Service Exception Stop Code Windows 10/11

How To Fix the System Service Exception Error in Windows 10

In this guide, you can find a variety of different methods and learn how to fix the System Service Exception BSOD error in Windows 10.

The System Service Exception in Windows 10 is one of the Blue Screen of Death errors that Windows users still encounter today. Although uncommon, these errors are serious and can instantly crash your system. When this happens, data loss and often corruption of files are possible.

This article details how to fix the SYSTEM_SERVICE_EXCEPTION stop code on Windows 10. The methods displayed below are easy and effective, making troubleshooting a breeze.

What Is the System Service Exception Error?

If your system experiences a fatal error, you will receive a blue screen with a STOP code that reboots your system. These errors are typically unpredictable, but there are ways to help prevent them from occurring again.

STOP codes are Windows 10’s way of telling you that there is a serious problem going on with your system, and it will immediately shut down to try and prevent any further damage. The SYSTEM_SERVICE_EXCEPTION error can be caused by a few different things:

Incompatible, damaged, or outdated drivers for Windows 10

A bug or error in Windows 10 updates

Corrupted Windows 10 system files

Malware or other cyberattacks

Below is a list of solutions that you should complete until the SYSTEM_SERVICE_EXCEPTION error disappears. The most obvious solution is to update your drivers and run a Windows 10 file system check for errors, however, it’s crucial that you follow all the steps below to avoid this error from happening in the future.

How To Fix the System Service Exception Error

Although it might take a couple of tries, fixing the SYSTEM_SERVICE_EXCEPTION stop code error in Windows 10 is actually not that difficult. Here’s how to do it:

1. Update Windows 10

First, make sure that Windows 10 is up to date. Outdated system files can cause unexpected errors. Checking for a pending update will help you figure out if this is causing your issue. Here’s how you can update Windows 10:

Click on the Windows icon in the bottom left of your screen to bring up the Start menu.

Choose Settings, or alternatively use the Windows + I shortcut.

Click on the Update & Security tile. This is where you can find most of your Windows Update settings and choose when to receive updates.

Make sure to stay on the default Windows Update tab. Click on the Check for updates option and wait for Windows 10 to find available updates.

If you see any updates already displayed, click on the View all optional updates link to see and install them.

If an update is found, click on the Install option and wait for Windows 10 to download and apply the necessary updates.

2. Update Your Drivers

Your graphics card driver needs to be updated regularly — it’s more important than you might think. Outdated or bad drivers can create major problems, especially after big Windows 10 updates when compatibility errors often occur.

There are three options to update your graphics drivers if you’re seeing the SYSTEM_SERVICE_EXCEPTION error on your device. Two of these also sort out other problematic drivers or driver corruption on your computer.

Option 1. Update Display Adapter Driver Manually

Check the type of graphics card you’re using:
1. Press the Windows + R keys.
2. Type in “dxdiag” and press the OK button. This is the shortcut to reach the DirectX Diagnostics tool.
3. Switch to the Display tab. Under Device, take note of the name and manufacturer of your graphics card.

Go to the manufacturer’s website, and then navigate to their download page. Here are some of the most common manufacturers’ web pages where you can find driver downloads:
- Intel Drivers & Software page
- NVIDIA Driver download page
- AMD Drivers and support page

Find your graphics card model using the provided search tools, and download its newest driver.

Download and install the latest driver by double-clicking on the downloaded file and following the on-screen instructions. You might be prompted to restart your device.

Note: Always make sure that you’re always downloading and installing the correct driver that matches your graphics card. If you’re uncertain, try searching on Google, or contact the customer service of your manufacturer.

Option 2. Update Display Adapter Driver Automatically

Press the Windows + R keys.

Type in “devmgmt.msc” without quotation marks, and press the OK button. This will take you to the Device Manager window.

Expand the Display adapters section by clicking on the arrow icon to the left. Right-click on your current driver, and then select the Update driver option.

Click on Search automatically for updated driver software to allow Windows 10 to automatically update your driver. When you’re done, feel free to exit the Device Manager and restart your computer.

Option 3. Update Your Drivers With a Third-Party App

While it’s not necessary to use a third-party app for driver updates, it’s an option that is available to all Windows 10 users. You can also find and download third-party updater tools such as Driver Booster, DriverHub, or DriverPack Solution to automatically update drivers.

Most of these tools are free and easy to use. If you’re not satisfied with the service, we recommend searching the internet for more advanced apps.

Always make sure that the app you’re using is trustworthy. Some applications that offer to fix or update your drivers contain malware, adware, or spyware. We recommend searching for the name of the product and reading reviews made by real users before downloading any software.

3. Run the System File Checker and Chkdsk Commands

The System File Checker (SFC) is a built-in tool to help to troubleshoot in Windows 10. It’s able to automatically detect corrupted system files, and repair them to working order. You can use the SFC scan to potentially fix BSoD errors with the SYSTEM_SERVICE_EXCEPTION stop code.

If the SFC scan didn’t work, continue with the steps and try running Check Disk to repair your PC. The chkdsk command attempts to identify and get rid of disk issues, which may help you resolve Blue Screen of Death errors.

Open the search bar in your taskbar by clicking on the magnifying glass icon. You can also bring it up with the Windows + S keyboard shortcut.

Type Command Prompt in the search box. When you see it in the results, right-click on it and choose Run as Administrator.

When prompted by the User Account Control (UAC), click Yes to allow the app to launch with administrative permissions.

Once the Command Prompt window is open, type in the following command and press Enter to execute it: sfc /scannow

Wait for the System File Checker to finish scanning your computer. If it finds any errors, you’ll be able to fix them automatically through the SFC command itself, which may also fix related errors.

Next, input the following command and press Enter to execute it: chkdsk C: /f /r /x

This command is going to check the C: drive. If your Windows 10 has been installed on a different drive, make sure to modify the command accordingly by replacing “C:”.

Wait for the Check Disk command to finish running. It’ll attempt to fix issues with the drive and recover any readable information. Restart your device once both commands have been executed.

4. Uninstall Problematic Applications

Some applications are known to cause the System Service Exception error on Windows 10. This is possible because of conflicts, bad updates, or an outdated version of the software is installed on your computer. Here’s how you can uninstall applications known to cause this Blue Screen error.

Click on the Windows icon in the bottom left of your screen to bring up the Start menu. Choose Settings, or alternatively use the Windows + I shortcut.

Click on the Apps tile. This is where you can find every application installed on your computer.

Check if you have any of the following applications installed on your computer:
- Virtual CloneDrive
- XSplit Broadcaster
- BitDefender Antivirus
- Cisco VPN
- Asus GameFirst Service
- McAfee Antivirus

If any of the applications above is installed on your computer, click on it once and then click on the Uninstall button.

Click Uninstall again to confirm your choice, and then follow any on-screen instructions given by the program’s uninstaller. Make sure to entirely remove the software.

Repeat these steps for all of the applications in the list. After you uninstall all problematic applications, restart your computer and see if the Blue Screen of Death has been resolved.

5. Disable Your Webcam

In some cases, external hardware such as webcams may lead to the System Service Exception error. You can test this by disabling your webcam and seeing whether or not the error is resolved. If you don’t have a webcam, try and think of the most recent device you connected to your computer and try to disable that one using the instructions below.

Press the Windows + X keys on your keyboard, and choose Device Manager from the menu that pops up in the corner of your screen.

Locate your webcam or another device you recently connected to the computer, then right-click on it and choose Disable device from the context menu.

Restart your computer to see if this fixed the BSoD issue.

After trying this method, check if your situation has improved. If the error returns again, try a different solution below!

6.

Turn Off the Google Update Service

In some reports, the cause of the System Service Exception STOP code has been identified as the Google Automatic Update service. As the name suggests, this service is responsible for keeping any Google software on your system up-to-date. You can attempt to disable this service to see if the error is fixed afterward.

Press the Windows + R keys on your keyboard. This is going to bring up the Run utility.

Type in «services.msc» without quotation marks and press the Enter key on your keyboard. This will launch the Services manager.

Scroll down until you find the Google Update Service (gupdate) service. Right-click on it and select the Properties option from the context menu.

Choose Disabled from the Startup type drop-down menu and restart your computer. This will ensure that the service can’t run on your device and cause issues.

After disabling this service, reboot your computer and see if you receive the SYSTEM_SERVICE_EXCEPTION stop code again. If not, your issue has been fixed — make sure to use the manual updater for any Google applications installed on the device.

7. Temporarily Disable Your Antivirus

Antivirus software is known to cause issues on computers by interfering with your system by blocking apps and services from running properly. You can test if the antivirus you’re using at the moment is causing the System Service Exception error by temporarily disabling it.

Note that this method is not recommended as it is unsafe to use your computer without protection. Only proceed if you’re aware of the possible risks. Have a backup of your system to revert any damage that may happen if malicious programs are present on the device.

Right-click on an empty space in your taskbar and choose Task Manager.

If the Task Manager launches in compact mode, make sure to expand details by clicking on the “Mode details” button.

Switch to the Start-up tab using the header menu located at the top of the window. Find your antivirus application from the list and select it by clicking on it once.

Click on the Disable button now visible in the bottom-right of the window. This will disable the application from launching when you start your device.

Restart your computer and check if the System Service Exception error is still happening. If you wish to re-enable your antivirus, simply follow the steps above and click the Enable button.

Final Thoughts

We hope that through this article you were able to find a working solution to the System Service Exception error in Windows. If you ever experience the error again, return to our article to apply the necessary fix.

Our Help Center offers hundreds of guides to assist you if you’re in need of further help. Return to us for more informative articles, or get in touch with our experts for immediate assistance.

One More Thing

Looking for more tips? Check out our other guides in the SoftwareKeep Blog and our Help Center! You’ll find a wealth of information on how to troubleshoot various issues and find solutions to your tech problems.

Sign up for our newsletter and get early access to our blog posts, promotions, and discount codes. Plus, you’ll be the first to know about our latest guides, deals, and other exciting updates!

[FIXED] BSOD System Service Exception Stop Code Windows 10/11

Have you received the blue screen with the stop code: system service exception in Windows 11/10/8/7? If so, what should you do to resolve this issue? Take it easy; now we will give you eight possible fixes for the system_service_exception BSOD error so that you can run the PC properly.

BSOD System Service Exception Windows 10/11/8/7

Blue screen of death (BSOD) errors always appear with a specific error when you use a computer. This makes you very annoyed since the errors stop you from booting the PC. System service exception is a common blue error that can happen on all versions of Windows 11/10/8/7 when playing games, overclocking hardware, etc.

In Windows 7, you can find that the error stop code 0x0000003b is on the screen, as shown below:

If you are using Windows 10/11, Windows will prompt “Your PC ran into a problem and needs to restart…”.

Tip: Besides the system exception error, you may receive the blue screen with different errors, such as CRITIAL_PROCESS_DIED, INACCESSIBLE BOOT DEVICE, UNMOUNTABLE BOOT VOLUME, etc. Read this post — Quickly Solve — Your PC Ran into a Problem and Needs to Restart to learn more!

This BSOD error can be caused by corrupted or outdated Windows drivers, damaged system files, viruses & malware, graphic user interface errors, etc. Now, lets’ go to see how to fix system_service_exception.

System Service Exception Fixes for Windows 10/11/8/7

Sometimes, the PC might still go to the blue screen with the same stop error even after the reboot. This is why some people search for “system service exception boot loop” in Google. Additionally, some people reported this issue — system service exception Windows 10/11 keeps restarting.

The PC can go to the Windows desktop in most cases after restarting. But you might encounter this issue again after a period of time. In the following parts, we will show you full solutions targeting this situation. Of course, if your PC fails to boot, you can also try some methods in safe mode.

Solution 1: Perform a Virus Check

The system_service_exception blue screen error might be caused by viruses or malware. So, running antivirus software to scan and remove viruses is very important to fix the blue screen stop 0x0000003b. Just download antivirus software from the website. Then, run it to perform a virus check.

Solution 2: Uninstall Specific Program

Sometimes the stop code system service exception happens on Windows 11/10/8/7 after installing particular applications. Disabling or uninstalling them is useful.

Just do this work targeting the following programs:

McAfee (turn it off, not uninstall)
Webcam (disable it)
BitDefender and Cisco VPN (remove)
Virtual CloneDrive
Xsplit and MSI Live Update
Asus GameFirst Service
Etc.

Solution 3: Update Your Drivers

When receiving the blue screen system service exception stop code, you should consider that the cause of this issue is the incompatible drivers. Windows updates might keep drivers up-to-date but this doesn’t mean Windows always uses the correct and latest drivers.

So, the solution is to install the latest drivers. Follow the instructions below:

Step 1: Press Win and R, input devmgmt.msc in the textbox of the Run dialog and click OK.

Step 2: After entering the Device Manager interface, find the drivers (including video card drivers and sound card drivers) that have a yellow alert symbol attached to it. Then, right-click each problem-driver to choose Update driver.

Step 3: Let your Windows search automatically for updated driver software. Wait patiently until the process finishes.

Solution 4: Run System File Checker

If there are corrupted system files, system service exception on startup might happen in Windows 10/8/7. The next thing that you can do is to run a scan with System File Checker that is a built-in tool for fixing various problems including blue screen of death errors.

Step 1: Input cmd in the Windows search box.

Step 2: Right-click Command Prompt to run it as an administrator.

Step 3: Type sfc /scannow in the CMD window and press Enter.

From the following figure, you can see this tool is beginning a system scan. Please wait for some time and exit cmd after finishing verification 100%.

Tip: Sometimes you may encounter some errors like Windows resource protection could not perform the requested operation or Windows resource protection could not start the repair service when performing an SFC scan. To fix it, go to this post — Quickly Fix SFC Scannow Not Working (Focus on 2 Cases). Sometimes sfc get stucks and you can find solutions from the guide — Windows 10 SFC /Scannow Stuck at 4/5/30/40/73, etc.? Try 7 Ways!

Solution 5: Check the Hard Drive

If there are some errors on your hard drive, the issue – BSOD system service exception Windows 11/10/8/7 might happen. Running CHKDSK in Command Prompt can verify the file system and fix some issues with certain settings

Step 1: Similarly, run Command Prompt as an administrator.

Step 2: Type chkdsk /f /r in the CMD window and press Enter.

Step 3: Type Y and restart your PC so that the utility can check for file system errors, find and shield bad sectors.

Tip: If you want to check for errors on your other drives, use chkdsk n: /f /r (n means the drive letter). This operation can proceed without restarting your PC.

Solution 6: Use Windows Troubleshooter

If you are running Windows 10 Creators Update or the later systems, just try using Troubleshooter — Microsoft’s built-in troubleshooting tool. Just like System File Checker, it is also able to deal with various system issues, including BSOD errors like stop code system_service_exception.

Here is how to run the Troubleshooter for system exception error Windows 10/11:

Step 1: Open the Troubleshoot window in two ways:

Type troubleshoot in the search box and click this system setting.
Go to Start > Settings > Update & Security > Troubleshoot.

Step 2: Go to the Find and fix other problems section, click Blut Screen and choose Run the troubleshooter.

Step 3: Follow the further instructions on the screen to finish the fix.

Tip: Windows Troubleshooter may fail to work. If so, resort to the post — 8 Useful Fixes for an Error Occurred While Troubleshooting Are Here for help.

Solution 7: Run Windows Memory Diagnostic Tool

Memory problems can cause your computer to stop working with a stop error. Checking the RAM memory could be useful to fix the system exception error in Windows 11/10/8/7. Here is what you should do:

Step 1: Type memory diagnostic in the search box and click the app to open.

Step 2: In the Windows Memory Diagnostic window, click Restart now and check for problems.

Step 3: During the process of PC reboot, this tool checks for memory problems. Windows will display the test result for you. If this tool doesn’t work, run Memtest86 — original self booting memory testing software.

Note: The above methods target the PC that can run normally. If your PC cannot boot, you need to go to Windows safe mode and then perform these fixes.

Solution 8: Run Startup Repair

To fix the service exception error, you can run Startup Repair. In Windows 10/11, press Shift plus Restart to enter Windows Recovery Environment (WinRE) – if Windows cannot boot, restart the PC several times when Windows logo appears. In Windows 7, press F8 on reboot, click Repair your computer to enter WinRE. Then, follow the given guide for a repair.

Take Win 10 as an example:

Step 1: Go to Troubleshoot in the Choose an option page.

Step 2: Click Advanced options > Startup Repair to fix problems that prevent OS from loading.

After that, restart your PC and this should fix Windows 11/Windows 10 BSOD system exception.

Tip: Additionally, you can try other system service exception fixes in Windows 11/10/8/7, such as perform a system restore, run driver verifier, revise recent system changes, remove Windows update number KB2778344 in safe mode, and reset Windows. Just try them if the solutions above don’t work for you.

“There are many solutions to BSOD stop code system_service_exception. Just share them with other people so that they can also get rid of the blue screen.” Click to Tweet

What to Do: Create a System Image for Windows 11/10/8/7

After trying the above solutions, you should have fixed the service exception error. To avoid a similar issue in the future, you had better create a system image. This way, you can perform quick disaster recovery in the event of blue screen system service exception on startup/boot loop rather than spending much time in searching for solutions.

MiniTool ShadowMaker will be your good assistant. Simply put, it is free backup software for Windows 11/10/8/7 that is able to easily back up Windows operating system, files & folders, partitions or the hard drive. Above all, it supports automatic backup, differential & incremental backup to meet your different needs.

Right now, get the Trial Edition to use it for PC backup within 30 days. Of course, you can choose to upgrade this freeware to Pro Edition.

Free Download

Step 1: Open MiniTool ShadowMaker

Double-click this program.
Continue to use the Trial Edition.
Click the Connect button in This Computer to run a local backup.

Step 2: Decide Backup Source and Destination

By default, MiniTool ShadowMaker backs up the system. If you want to back up the entire system, go to Source to check all partitions on that hard drive.
Also, the destination is selected by this software. Of course, you can go to Destination and then specify an external drive, USB flash drive, NAS, etc. Usually, an external drive is suggested.

Step 3: Start a Backup

You can click Back up Now to create a system image at once.
Or click Back up Later. When there is a need, go to click Back up Now in Manage.

Further Reading: Create Bootable Media

After finishing system backup, you should create a bootable disc or USB drive so that you can easily perform system image recovery when BSOD stop code system service exception happens to Windows 11/10/8/7.

Step 1: Go to the Tools page.

Step 2: Click Media Builder from the features list.

Step 3: Choose WinPE-based media with MiniTool plug-in. This option provides better compatibility with computer hardware.

Step 4: Select the proper option to create the media. CD/DVD, USB hard drive, USB flash drive, and an ISO file are OK.

Tip: If you choose the ISO file, you still need to burn it to a USB drive or CD/DVD disc.

Related article: How to Boot from Burned MiniTool Bootable CD/DVD Discs or USB Flash Drive?

When Windows service exception error happens, change the BIOS boot setting to run PC from the created media. Then, you can perform a system restore instead of finding the fixes for system service exception BSOD.

Now, you can free get MiniTool ShadowMaker Trial Edition from the following button to back up your Windows. Of course, you can also share this software with your friends for PC backup.

Free Download
Click to Tweet

Have you got the blue screen system service exception Windows 11/10/8/7? Try these solutions above one by one to fix it. After completing the fix, we suggest using MiniTool ShadowMaker to back up your system so that you can restore your PC to a previous state in case of the service exception error.

If you have any other methods to fix this issue, please tell us. Also, any question or suggestion is also appreciated. Leaving a comment and contacting [email protected] are available.

System Service Exception FAQ

What is System Service Exception?

System Service Exception is one of the blue screen of death (BSoD) errors and it is along with the error stop code 0x0000003b if you are using Windows 7. When getting this blue screen, it means that the Windows operating system goes wrong on one or more of the system process.

How do I fix system service exception in Windows 10?

Perform a virus scan
Uninstall specific programs
Update your drivers
Run System File Checker
Check the hard drive
Use Windows Troubleshooter
Run Windows Memory Diagnostic Tool
Run Startup Repair

What is a stop code?

A stop code is also called a bug check code. When the Windows operating system goes wrong, a blue screen will be displayed with a stop code that can be analyzed to sort out the actual cause of this BSoD error.

What causes blue screen?

BSoD errors can be triggered by malfunctioning hardware like power supply issues, device overheating, faulty memory, etc. and problems with the hardware driver software. Once a blue screen appears, Windows stops working and you need to fix it.

Facebook
Twitter
Linkedin
Reddit

SYSTEM SERVICE EXCEPTION error in Windows 10 — how to fix

One of the common errors that Windows 10 users have is the blue screen of death (BSoD) SYSTEM_SERVICE_EXCEPTION and the text «Your PC has encountered a problem and needs to restart. We’re just gathering some information about the error, and then it will automatically restart.»

This manual details how to fix the SYSTEM SERVCIE EXCEPTION error, how it can be caused, and the most common variants of this error, indicating the immediate steps to resolve it. nine0003

Causes of the SYSTEM SERVICE EXCEPTION error

The most common cause of a blue screen with a SYSTEM_SERVICE_EXCEPTION error message is errors in the hardware drivers of a computer or laptop.

In this case, even if the error occurs when starting a certain game (with SYSTEM_SERVICE_EXCEPTION error messages in the files dxgkrnl.sys, nvlddmkm.sys, atikmdag.sys) network programs (with netio.sys errors) or, which is a common case, when launching Skype (with a message about a problem in the ks.sys module), as a rule, the problem is in the incorrectly working drivers, and not in the program itself. nine0003

It is possible that everything worked fine on your computer before, you did not install new drivers, but Windows 10 itself updated the device drivers. However, there are other possible causes of the error, which will also be considered.

Common error patterns and basic fixes for them

In some cases, when a blue screen of death occurs with a SYSTEM SERVICE EXCEPTION error, the error information immediately indicates the . sys file that caused the failure. nine0003

If this file is not specified, then you will have to look at the information about the file that caused the BSoD in the memory dump. To do this, you can use the BlueScreenView program, which can be downloaded from the official website https://www.nirsoft.net/utils/blue_screen_view.html (download links are at the bottom of the page, there is also a Russian translation file, which is enough to copy to the folder with the program so that it starts in Russian).

Note: In case an error occurs that prevents you from working in Windows 10, try the following steps while entering Safe Mode (see How to Enter Windows 10 Safe Mode). nine0003

After launching BlueScreenView, look for information about recent errors (the list at the top of the program window) and look for files that crashed causing the blue screen (at the bottom of the window). If the Dump Files list is empty, then you most likely have memory dumps on errors disabled (see How to turn on memory dumps on Windows 10 crashes).

Often, by looking at filenames, you can find (by searching the file name on the Internet) which driver they are part of and take action to remove and install another version of that driver. nine0003

Typical file variants that cause SYSTEM_SERVICE_EXCEPTION to fail:

netio.sys — Typically, the problem is caused by faulty network card or Wi-Fi adapter drivers. At the same time, the blue screen may appear on certain sites or when the network device is under high load (for example, when using a torrent client). The first thing to try when an error occurs is to install the original drivers for the network adapter you are using (from the laptop manufacturer’s website for your device model or from the motherboard manufacturer’s website specifically for your MP model, see How to find out the motherboard model). nine0034
dxgkrnl.sys, nvlddmkm.sys, atikmdag.sys — most likely a problem with the video card drivers. Try completely uninstalling your graphics card drivers using DDU (see How to uninstall your graphics card drivers) and install the latest available drivers from AMD, NVIDIA, Intel websites (depending on your graphics card model).
ks.sys — can be related to different drivers, but the most common case is a SYSTEM SERVICE EXCEPTION kc.sys error when installing or starting Skype. In this situation, the cause is most often the webcam drivers, sometimes the sound card. In the case of a webcam, it is possible that the reason is in the proprietary driver from the laptop manufacturer, and everything works fine with the standard one (try to go to the device manager, right-click on the webcam — update the driver — select «Search for drivers on this computer» — «Select from the list of available drivers on the computer» and check if there are other compatible drivers in the list). nine0034

If in your case it is some other file, first of all try to find on the Internet what it is responsible for, perhaps this will allow you to guess which device drivers are causing the error.

Additional ways to fix the SYSTEM SERVICE EXCEPTION error

The following are additional steps that can help you with a SYSTEM SERVICE EXCEPTION error if you can’t find the problematic driver or updating it didn’t fix your problem:

If the error began to appear after installing antivirus software, a firewall, an ad blocker, or other threat protection programs (especially counterfeit ones), try removing them. Don’t forget to restart your computer.
Install the latest Windows 10 updates (right click on the Start button — Settings — Update and Security — Windows Update — Check for Updates button).
If until recently everything was working properly, then try to see if there are restore points on the computer and use them (see Windows 10 restore points). nine0034
If you know approximately which driver caused the problem, you can try not to update (reinstall it), but to roll back (go to the properties of the device in Device Manager and use the «Roll Back» button on the «Driver» tab).
Sometimes an error can be caused by errors in the disk (see How to check your hard drive for errors) or RAM (How to check the RAM of a computer or laptop). Also, if more than one memory bar is installed on the computer, you can try working with each of them separately. nine0034
Run a Windows 10 system file integrity check.
In addition to BlueScreenView, you can use the WhoCrashed utility (free for home use) to analyze memory dumps, which can sometimes provide useful information about the module that caused the problem (though in English). After starting the program, click the Analyze button, and then review the contents of the Report tab.
Sometimes the cause of the problem may not be the hardware drivers, but the hardware itself — poorly connected or malfunctioning. nine0034

I hope one of the options helped to fix the error in your case. If not, please describe in the comments in detail how and after what the error appeared, what files appear in the memory dump — perhaps I can help.

remontka.pro in Telegram | Subscription methods

Support the author and site

Resolved: Windows 10 System Service Exception BSOD (error check 0x0000003B)

Windows 10 BSOD SYSTEM_SERVICE_EXCEPTION , error check 0x0000003B most often occurs due to faulty drivers. Also, sometimes system files are corrupted, a memory module is faulty, or registry configuration results are incorrect. nine0073 system service exception boot loop on windows 10.

Your computer has encountered a problem and needs to be restarted. We’re just collecting some error information and then you can restart.» If you want to know more, you can search the web for this error later: System Service Exception .

If you are also struggling with this SYSTEM_SERVICE_EXCEPTION BSOD error, here are some effective solutions you can apply. nine0003

Message content: —

If new device drivers or system services have been added recently, try uninstalling or updating them. If you recently added new hardware to the system, remove it and restart Windows, check if the problem is resolved.

If Windows 10 frequently restarts with this blue screen on startup, it is not possible to start Windows normally to perform troubleshooting steps. Then run Startup Repair from Advanced options.

Startup Repair Diagnostics and troubleshooting is preventing Windows from starting normally. Startup Repair checks and fixes missing corrupted system files, boot configuration options, incompatible drivers, problematic update installation, etc. Now check that Windows starts normally, no more BSOD errors at startup.

If Windows still does not start normally, then boot Windows into Safe Mode and follow the troubleshooting steps below. nine0003

Check for a faulty device driver

Open Device Manager and check if any devices are marked with a yellow exclamation mark. Also suggest you uninstall and reinstall the display driver and check. Please follow these steps:

Simultaneously press Windows + X keys and click Device Manager.
Click to expand video adapters.
Right-click the adapter and select Uninstall. nine0034
You may then need to restart your computer.

You can now reinstall the latest display driver from the computer manufacturer’s website.

Also check with the manufacturer if firmware updates are available.

Disable fast startup and Hibranete

In most cases, Windows 10 New’s hybrid shutdown (fast startup) feature can cause a BSOD error when resuming from sleep. If you get a blue screen when waking up from sleep, we recommend that you turn off sleep and fast startup. nine0003

Open Control Panel, then find and open Power Options.
Click «Choose what the power buttons do» on the left side of the window.
Click Change settings that are currently unavailable.
Under Shutdown Settings, uncheck «Enable Fast Startup » and Hibernate.

Turn off Google Update Services

Press Windows + R, type msocnfig and press enter.
Here, in the system configuration window, go to the services tab.
Scroll down and find the Google Update Service.
Uncheck both boxes (shown in the image below), click Apply and OK.
This will be like a restart window for the changes to take effect.
Restart windows and check if it works for you

Run the sfc utility to repair corrupted files

Windows system files are an important part of the OS for smooth operation. And if any system file gets corrupted, corrupted or missing then windows starts misbehaving like showing errors, starting problems and maybe this Windows 10 System Service Error BSOD is one of them. You can check and repair corrupted system files using the Windows SFC utility.

Type cmd when searching in the start menu,
Right-click command prompt, select run as administrator,
First, run the DISM command: DISM /online /clean-image /health recovery
After that, type the command sfc /scannow and press enter.
This will scan for missing corrupted system files.

Run the System File Checker

If this System File Checker detects that protected files are overwritten by incorrect files, it will extract the correct system file from the system file backup (namely dllcache) and replace the incorrect file. nine0003

Wait until the scanning process is 100% complete,
Then restart windows for the changes to take effect.

Run CHKDSK

Type command prompt in the Start menu search bar, then right-click on the best option and select Run as administrator.
Then type chkdsk /r and press Enter.
The command will scan your system for errors and fix any problems in the process. nine0034

Check bed memory

Most blue screen errors are due to corrupted system files and bed memory. Faulty or misconfigured RAM can go from BSOD to total inability to boot the system. You should check the hardware, make sure all the sticks are working properly, and if everything is ok, check the timings and frequencies, as some motherboards and processors, especially those from AMD, can be very tricky with this. nine0003

Equipment check is very simple. First of all, turn off your computer. You can also unplug it from the power supply as a precaution. Open the lid and find the RAM sticks. What you need to do is remove them all and try to turn on the computer with each flash drive, one by one.